Number of items: 42. BBandyopadhyay, Siddhartha (1988) Synthesis, Sintering & Properties of SiAlONs. PhD thesis, Jadavpur University. Bandyopadhyay, Siddhartha and Mukerji, Joydeb (1988) Sintering and properties of sialons derived from kaolin. Advanced Ceramic Materials, 3 (4). pp. 328-331. ISSN 0883-5551 Bandyopadhyay, Tarun Kumar and Sen, Ranjan and Bhadra, Shyamal Kumar and Dasgupta, Kamal and Saha, Prasenjit (1988) Fabrication of multimode optical fibres for telecommunication. Transactions of the Indian Ceramic Society, 47 (5). pp. 1290-140. ISSN 0371-750X Basu, Rajendra Nath and Sen, A and Das Sharma, Abhijit and Sen, S and Maiti, Himadri Sekhar (1988) Effect of preparation conditions on the orientation of Y-Ba-Cu oxide powders during x-ray diffractometry. Materials Letters, 7 (3). pp. 75-77. ISSN 0167-577X Basu, Rajendra Nath and Sen, Amarnath and Das Sharma, Abhijit and Sen, S and Maiti, Himadri Sekhar (1988) Effect of preparation conditions on the orientation of Y-Ba-Cu oxide powders during x-ray-diffractometry. Materials Letters, 7 (3). pp. 75-77. ISSN 0167-577X CChakraborty, D and Mukhopadhyay, Anoop Kumar (1988) High-temperature young modulus of reaction-bonded Si3N4, liquid-phase sintered SI3N4 and sialon. Ceramics International, 14 (2). pp. 127-132. ISSN 0272-8842 Chakravorty, A K and Ghosh, D K (1988) Synthesis and 980-degrees-C phase development of some mullite gels. Journal of the American Ceramic Society, 71 (11). pp. 978-987. ISSN 0002-7820 Chatterjee, Minati and Ganguli, Dibyendu (1988) Ambient drying and cracking phenomena in monolithic zirconia gels. Transactions of the Indian Ceramic Society, 47 (6). pp. 180-183. ISSN 0371-750X DDas, Probal Kumar and Mukerji, Joydeb (1988) Sintering behavior and properties of Si3N4 sintered with nitrogen-rich liquid in the system Y2O3-AlN-SiO2. Advanced Ceramic Materials, 3 (3). pp. 238-243. ISSN 0883-5551 Datta, S K and Mukhopadhyay, A K and Chakraborty, D (1988) Porosity dependence of strain of Si3N4 ceramics. Journal of Materials Science Letters, 7 (10). pp. 1119-1121. ISSN 0261-8028 De, A K (1988) Crystallisation of MgO-Al2O3-SiO2 glass with copper oxide as nucleating agent. CGCRI Bulletin, 35 (3-4). pp. 48-51. ISSN 0008-9397 Dutta, S K and Mukhopadhyay, Anoop Kumar and Chakraborty, D (1988) Assessment of strength by Youngs modulus and porosity - a critical-evaluation. Journal of the American Ceramic Society, 71 (11). pp. 942-947. ISSN 0002-7820 GGanguli, Dibyendu (1988) Effects of some dopant cations on the surface characteristics of alkoxide-derived silica-gel. Journal of Non-Crystalline Solids, 101 (1). pp. 117-119. ISSN 0022-3093 Guha, S K and Banerjee, S K (1988) Some experiments on a new design of a high temperature refractory kiln and calculation of heat balance for the same. Indian Potter, 27 (1). pp. 6-16. Guha, S K and Dasgupta, A (1988) Use of non-conventional raw materials for making saggars. Transactions of the Indian Ceramic Society, 47 (1). pp. 20-21. ISSN 0371-750X IIslam, R and Das, R (1988) Forecasting: production pattern of Indian refractory raw materials in 2000 AD. Transactions of the Indian Ceramic Society, 47 (4). pp. 120-126. ISSN 0371-750X KKumar , A and Roy, D M (1988) Pore structure studies of high early strength portland cement containing silica fume. Transactions of the Indian Ceramic Society, 47 (1). pp. 11-15. ISSN 0371-750X Kumar , A and Roy, R (1988) RESA - A wholly new process for fine oxide powder preparation. Journal of Materials Research, 3 (6). pp. 1373-1377. ISSN 0884-2914 Kundu, Debtosh and Biswas, Prasanta Kumar and Ganguli, Dibyendu (1988) Alkoxide-derived amorphous ZrO2 coatings. Thin Solid Films, 163. pp. 273-278. ISSN 0040-6090 Kundu, Dipali and Roy, S K (1988) Release of zinc and phosphate ions from ZnO-P2O5 glass systems and its characterization. Transactions of the Indian Ceramic Society, 47 (4). pp. 115-119. ISSN 0371-750X Kundu, Dipali and Roy, S K (1988) Spectrophotometric determination of phosphorus after selective separation and enrichment of heteropoly phosphomolybdate on polyurethane foam. CGCRI Bulletin, 35 (1-2). pp. 1-5. ISSN 0008-9397 Kundu, Dipali and Roy, S K (1988) A gravimetric method for determination of water in phosphate glasses. Transactions of the Indian Ceramic Society, 47 (5). 147-148, 155. ISSN 0371-750X Kundu, P and Pal, D and Sen, Suchitra (1988) Preparation and thermal evolution of sol-gel derived transparent ZrO2 and MgO-ZrO2 gel monolith. Journal of Materials Science, 23 (5). pp. 1539-1546. ISSN 0022-2461 MMaiti, Himadri Sekhar and Paria, M K (1988) High-temperature fuel-cells. Sadhana-Academy Proceedings in Engineering Sciences, 13. pp. 59-71. ISSN 0256-2499 Mandal, P and Poddar, A and Das, A N and Chakraborty, A and Ghosh, B and Choudhury, Pranab and Lahiri, Shyamal Kumar (1988) Magnetoresistance and thermoelectric-power of the Bi-Sr-Ca-Cu-O system. Physical Review B, 38 (13). pp. 9205-9208. ISSN 1098-0121 Mazumdar, Bhupendra Kumar (1988) Aromacity of coal - a reappraisal of the graphical densimetric approach. Fuel Processing Technology, 19 (2). pp. 179-202. ISSN 0378-3820 Mazumdar, Bhupendra Kumar (1988) Correlation of physical and chemical properties of coal hydrogenation distillates. Energy & Fuels, 2 (2). pp. 224-230. ISSN 0887-0624 Mondal, Jayanta Kumar and Roy, S K (1988) Spectrophotometric determination of aluminium in barium titanate. CGCRI Bulletin, 35 (1-2). pp. 22-25. ISSN 0008-9397 Mukerji, Joydeb and Bandyopadhyay, Siddhartha (1988) Sialons from natural aluminosilicates. Advanced Ceramic Materials, 3 (4). pp. 369-373. ISSN 0883-5551 Mukerji, Joydeb and Rakshit, Jaganmoy (1988) Dependence of strength and toughness of reaction bonded silicon nitride and composites on fabrication routes. Ceramics International, 14 (3). pp. 181-189. ISSN 0272-8842 Mukherjee, S K (1988) Ceramic fibre - an insulating material. Journal of Mines, Metals and Fuels, 36 (5). pp. 220-223. ISSN 0022-2755 Mukhopadhyay, Anoop Kumar and Chakraborty, D (1988) High-temperature fracture-toughness and fractographic study of reaction-sintered Si-Al-O-N and liquid-phase-sintered Si-Al-O-N. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 104. pp. 215-222. ISSN 0921-5093 Mukhopadhyay, Anoop Kumar and Chakraborty, D (1988) Influence on some factors on strength and fracture toughness of reaction bonded silicon nitride. Transactions of the Indian Ceramic Society, 47 (2). pp. 36-42. ISSN 0371-750X PPhani, Kalyan Kumar (1988) Analysis of static and dynamic fatigue of polycrstalline alumina. Journal of Materials Science, 23 (11). pp. 3864-3868. ISSN 0022-2461 Phani, Kalyan Kumar (1988) Evaluation of single-fibre strength distribution from fiber bundle strength. Journal of Materials Science, 23 (3). pp. 941-945. ISSN 0022-2461 Phani, Kalyan Kumar (1988) Strength distribution and gauge length extrapolations in glass-fiber. Journal of Materials Science, 23 (4). pp. 1189-1194. ISSN 0022-2461 Phani, Kalyan Kumar (1988) A new modified Weibull distribution function for the evaluation of the strength of silicon-carbide and alumina fibers. Journal of Materials Science, 23 (7). pp. 2424-2428. ISSN 0022-2461 Phani, Kalyan Kumar and De, Ashok Kumar (1988) Evaluation of concurrent flaw populations in silicon-carbide in terms of a modified Weibull distribution function. Journal of the American Ceramic Society, 71 (4). C196-C197. ISSN 0002-7820 Phani, Kalyan Kumar and De, Ashok Kumar (1988) An analysis of short length-strength distribution and prediction of long-length strength of optical fibres. Transactions of the Indian Ceramic Society, 47 (4). pp. 103-109. ISSN 0371-750X Phani, Kalyan Kumar and Maitra, A K and De, Ashok Kumar (1988) A new distribution function for analysis of dynamic fatigue of neutral glass. Indian Journal of Technology, 26 (2). pp. 95-98. ISSN 0019-5669 Phani, Kalyan Kumar and Niyogi, S K and De, Ashok Kumar (1988) Porosity dependence of fracture mechanical properties of reaction sintered Si3N4. Journal of Materials Science Letters, 7 (11). pp. 1253-1256. ISSN 0261-8028 SSen, Suchitra and Thiagarajan, S (1988) Phase-transformations in amorphous 3Al2O3-2SiO2 system prepared by sol-gel method. Ceramics International, 14 (2). pp. 77-86. ISSN 0272-8842 |