Article

Jana, Anuradha and Balla, Vamsi Krishna and Das, Mitun (2023) In-vitro corrosion and biocompatibility properties of heat treated Mg-4Y-2.25Nd-0.5Zr alloy. Materials Chemistry and Physics, 304. Art No-127873. ISSN 0254-0584

Reger, Nimu Chand and Devi, K Bavya and Balla, Vamsi Krishna and Das, Mitun (2023) In-Vitro Corrosion and Wear Studies of Ceramic Layers on Additively Manufactured Zr Metal for Implant Applications. Transactions of The Indian Institute of Metals, 76 (7). pp. 1949-1958. ISSN 0972-2815

Rajan, S Thanka and Das, Mitun and Arockiarajan, A (2023) In vitro assessment of corrosion resistance and biocompatibility of tantalum-niobium oxide surface-functionalized Mg alloy. Materials Chemistry and Physics, 301. Art No-127560. ISSN 0254-0584

Mandal, Santanu and Sahoo, Satyabrata Nigamananda and Balla, Vamsi K and Das, Mitun and Roy, Mangal (2023) Synergistic improvement of antibacterial, mechanical and degradation properties of Cu added Mg-Zn-Zr alloy. Materials Letters, 339. Art No-134115. ISSN 0167-577X

Rajan, S Thanka and Das, Mitun and Arockiarajan, A (2022) In vitro biocompatibility and degradation assessment of tantalum oxide coated Mg alloy as biodegradable implants. Journal of Alloys and Compounds, 905. Art No-164272. ISSN 0925-8388

Rajan, S Thanka and Das, Mitun and Arockiarajan, A (2022) Biocompatibility and corrosion evaluation of niobium oxide coated AZ31B alloy for biodegradable implants. Colloids and Surfaces B-Biointerfaces, 212. Art No-112342. ISSN 0927-7765

Roy, Pallabi and Mukherjee, Poulomi and Jana, Anuradha and Das, Mitun and Ghosh, Sumana (2022) Comparative study on thermal cyclic resistance of glass-ceramic-bonded TBC system and conventional TBC system. Journal of the Australian Ceramic Society, 58 (2). pp. 587-596. ISSN 0004-881X

Svetlizky, David and Zheng, Baolong and Vyatskikh, Alexandra and Das, Mitun and Bose, Susmita and Bandyopadhyay, Amit and Schoenung, Julie M and Lavernia, Enrique J and Eliaz, Noam (2022) Laser-based directed energy deposition (DED-LB) of advanced materials. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 840. Art No-142967. ISSN 0921-5093

Jana, Anuradha and Das, Mitun and Balla, Vamsi Krishna (2022) In vitro and in vivo degradation assessment and preventive measures of biodegradable Mg alloys for biomedical applications. Journal of Biomedical Materials Research Part A, 110 (2). pp. 462-487. ISSN 1549-3296

Svetlizky, David and Das, Mitun and Zheng, Baolong and Vyatskikh, Alexandra L and Bose, Susmita and Bandyopadhyay, Amit and Schoenung, Julie M and Lavernia, Enrique J and Eliaz, Noam (2021) Directed energy deposition (DED) additive manufacturing: Physical characteristics, defects, challenges and applications. Materials Today, 49. pp. 271-295. ISSN 1369-7021

Das, Mitun and Sharabani-Yosef, Orna and Eliaz, Noam and Mandler, Daniel (2021) Hydrogel-integrated 3D-printed poly(lactic acid) scaffolds for bone tissue engineering. Journal of Materials Research, 36 (19, SI). pp. 3833-3842. ISSN 0884-2914

Sahoo, Souvik and Joshi, Anuja and Balla, Vamsi K and Das, Mitun and Roy, Shibayan (2021) Site-specific microstructure, porosity and mechanical properties of LENSTM processed Ti-6Al-4V alloy. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 820. Art No-141494. ISSN 0921-5093

Rajan, S Thanka and Das, Mitun and Kumar, P Sasi and Arockiarajan, A and Subramanian, B (2021) Biological performance of metal metalloid (TiCuZrPd:B) TFMG fabricated by pulsed laser deposition. Colloids and Surfaces B-Biointerfaces, 202. Art No-111684. ISSN 0927-7765

Anand, Akrity and Das, Mitun and Kundu, Biswanath and Balla, Vamsi Krishna and Bodhak, Subhadip and Gangadharan, S (2021) Tribocorrosion characteristics of Ti6Al4V-TiB-TiN in-situ composite coatings prepared using plasma spraying. Journal of Composite Materials, 55 (14). pp. 1935-1946. ISSN 0021-9983

Mukherjee, Monideepa and Kundu, Jaydeb and Balla, Vamsi Krishna and Das, Mitun and Babu, K Sai and Krishna, G V Murali and Shome, Mahadev (2021) Microstructure and properties of parts manufactured by directed energy deposition of water-atomized low-alloy steel powders. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 814. Art No-141232. ISSN 0921-5093

Kumar, Manoj and Das, Mitun and Majumdar, Jyotsna Dutta and Manna, Indranil (2020) Development of graded composition and microstructure on Inconel 718 by laser surface alloying with Si, Al and ZrB2 for improvement in high temperature oxidation resistance. Surface & Coatings Technology , 402. Art No-126345. ISSN 0257-8972

Rakesh, K R and Bontha, Srikanth and Ramesh, M R and Das, Mitun and Balla, Vamsi Krishna (2020) Degradation, wettability and surface characteristics of laser surface modified Mg-Zn-Gd-Nd alloy. Journal of Materials Science-Materials in Medicine, 31 (5). Art No-42. ISSN 0957-4530

Jana, Anuradha and Das, Mitun and Balla, Vamsi Krishna (2020) Effect of heat treatment on microstructure, mechanical, corrosion and biocompatibility of Mg-Zn-Zr-Gd-Nd alloy. Journal of Alloys and Compounds, 821. Art No-153462. ISSN 0925-8388

Samanta, Aniruddha and Rane, Ramkrishna and Kundu, Biswanath and Chanda, Dipak Kr and Ghosh, Jiten and Bysakh, Sandip and Jhala, Ghanshyam and Joseph, Alphonsa and Mukherjee, Subroto and Das, Mitun and Mukhopadhyay, Anoop Kumar (2020) Bio-tribological response of duplex surface engineered SS316L for hip-implant application. Applied Surface Science, 507. Art No-145009. ISSN 0169-4332

Bera, Supriya and Paul, Sudeep and Ramasamy, Parthiban and Mandal, Durbadal and Das, Mitun and Lassnig, Alice and Renk, Oliver and Calin, Mariana and Eckert, Juergen (2019) Synthesis of new glassy Mg-Ca-Zn alloys with exceptionally low Young's Modulus: Exploring near eutectic compositions. Scripta Materialia, 173. pp. 139-143. ISSN 1359-6462

Nasker, Purnendu and Samanta, Aniruddha and Rudra, Sudip and Sinha, Arijit and Mukhopadhyay, Anoop Kumar and Das, Mitun (2019) Effect of fluorine substitution on sintering behaviour, mechanical and bioactivity of hydroxyapatite. Journal of the Mechanical Behavior of Biomedical Materials, 95. pp. 136-142. ISSN 1751-6161

Rakesh, K R and Bontha, Srikanth and Ramesh, M R and Das, Mitun and Balla, V K (2019) Laser surface melting of Mg-Zn-Dy alloy for better wettability and corrosion resistance for biodegradable implant applications. Applied Surface Science, 480. pp. 70-82. ISSN 0169-4332

Mallik, Awadesh Kumar and Das, Mitun and Ghosh, Sumana and Chakravarty, Dibyendu (2019) Spark plasma sintering of Ti-diamond composites. Ceramics International, 45 (9). pp. 11281-11286. ISSN 0272-8842

Revathi, A and Das, Mitun and Balla, V K and Devika, D. and Sen, Dwaipayan and Manivasagam, Geetha (2019) Surface engineering of LENS-Ti-6Al-4V to obtain nano- and micro-surface topography for orthopedic application. Nanomedicine-Nanotechnology Biology and Medicine , 18. pp. 157-168. ISSN 1549-9634

Pal, Anindya and Nasker, Purnendu and Paul, Sudeep and Chowdhury, Amit Roy and Sinha, Arijit and Das, Mitun (2019) Strontium doped hydroxyapatite from Mercenaria clam shells: Synthesis, mechanical and bioactivity study. Journal of the Mechanical Behavior of Biomedical Materials, 90. pp. 328-336. ISSN 1751-6161

Nasker, Purnendu and Mukherjee, Mayuri and Kant, Shashi and Tripathy, Sucheta and Sinha, Arijit and Das, Mitun (2018) Fluorine substituted nano hydroxyapatite: Synthesis, bio-activity and antibacterial response study. Ceramics International, 44 (17). pp. 22008-22013. ISSN 0272-8842

Rakesh, K R and Bontha, Srikanth and Ramesh, M R and Arya, Shashi Bhushan and Das, Mitun and Balla, V K and Srinivasan, A (2018) Laser surface modification of Mg-Zn-Gd alloy: microstructural, wettability and in vitro degradation aspects. Materials Research Express , 5 (12). Art No-126502. ISSN 2053-1591

Kottuparambil, Rakesh Rajan and Bontha, Srikanth and Rangarasaiah, Ramesh Motagondanahalli and Arya, Shashi Bhushan and Jana, Anuradha and Das, Mitun and Balla, V K and Amrithalingam, Srinivasan and Prabhu, T Ram (2018) Effect of zinc and rare-earth element addition on mechanical, corrosion, and biological properties of magnesium. Journal of Materials Research, 33 (20). pp. 3466-3478. ISSN 0884-2914

Biswas, Nilormi and Samanta, Aniruddha and Podder, Soumik and Ghosh, Chandan Kumar and Ghosh, Jiten and Das, Mitun and Mallik, Awadesh Kumar and Mukhopadhyay, Anoop Kumar (2018) Phase pure, high hardness, biocompatible calcium silicates with excellent anti-bacterial and biofilm inhibition efficacies for endodontic and orthopaedic applications. Journal of the Mechanical Behavior of Biomedical Materials, 86. pp. 264-283. ISSN 1751-6161

Manne, Bhaskar and Thiruvayapati, Harish and Bontha, Srikanth and Rangarasaiah, Ramesh Motagondanahalli and Das, Mitun and Balla, V K (2018) Surface design of Mg-Zn alloy temporary orthopaedic implants: Tailoring wettability and biodegradability using laser surface melting. Surface & Coatings Technology , 347. pp. 337-349. ISSN 0257-8972

Sahoo, Souvik and Sinha, Arijit and Balla, Vamsi Krishna and Das, Mitun (2018) Synthesis, characterization, and bioactivity of SrTiO3-incorporated titanium coating. Journal of Materials Research, 33 (14). pp. 2087-2095. ISSN 0884-2914

Som, Ipsita and Balla, V K and Das, Mitun and Sukul, Dipankar (2018) Thermally oxidized electron beam melted gamma-TiAl: In vitro wear, corrosion, and biocompatibility properties. Journal of Materials Research, 33 (14). pp. 2096-2105. ISSN 0884-2914

Marattukalam, Jithin J and Balla, V K and Das, Mitun and Bontha, Srikanth and Kalpathy, Sreeram K (2018) Effect of heat treatment on microstructure, corrosion, and shape memory characteristics of laser deposited NiTi alloy. Journal of Alloys and Compounds, 744. pp. 337-346. ISSN 0925-8388

Chalisgaonkar, Vaibhav and Das, Mitun and Balla, V K (2018) Laser processing of Ti composite coatings reinforced with hydroxyapatite and bioglass. Additive Manufacturing, 20. pp. 134-143. ISSN 2214-8604

Das, Mitun and Bhimani, Kevin and Balla, V K (2018) In vitro tribological and biocompatibility evaluation of sintered silicon nitride. Materials Letters, 212. pp. 130-133. ISSN 0167-577X

Balla, V K and Dey, Sangeetha and Muthuchamy, Adiyen A and Ram, G D Janaki and Das, Mitun and Bandyopadhyay, Amit (2018) Laser surface modification of 316L stainless steel. Journal of Biomedical Materials Research Part B-Applied Biomaterials, 106 (2). pp. 569-577. ISSN 1552-4981

Samanta, Aniruddha and Bhattacharya, Manjima and Ratha, Itishree and Chakraborty, Himel and Datta, Susmit and Ghosh, Jiten and Bysakh, Sandip and Sreemany, Monjoy and Rane, Ramkrishna and Joseph, Alphonsa and Mukherjee, Subroto and Kundu, Biswanath and Das, Mitun and Mukhopadhyay, Anoop Kumar (2018) Nano- and micro-tribological behaviours of plasma nitrided Ti6Al4V alloys. Journal of the Mechanical Behavior of Biomedical Materials, 77. pp. 267-294. ISSN 1751-6161

Reger, Nimu Chand and Balla, V K and Das, Mitun and Bhargava, Anil Kumar (2018) Wear and corrosion properties of in-situ grown zirconium nitride layers for implant applications. Surface & Coatings Technology , 334. pp. 357-364. ISSN 0257-8972

Datta, Susmit and Das, Mitun and Balla, V K and Bodhak, Subhadip and Murugesan, V K (2018) Mechanical, wear, corrosion and biological properties of arc deposited titanium nitride coatings. Surface & Coatings Technology , 344. pp. 214-222. ISSN 0257-8972

Paul, Sudeep and Pal, Anindya and Roy Choudhury, Amit and Bodhak, Subhadip and Balla, V K and Sinha, Arijit and Das, Mitun (2017) Effect of trace elements on the sintering effect of fish scale derived hydroxyapatite and its bioactivity. Ceramics International, 43 (17). pp. 15678-15684. ISSN 0272-8842

Paul, Sudeep and Pal, Anindya and Choudhury, Amit Roy and Bodhak, Subhadip and Balla, Vamsi Krishna and Sinha, Arijit and Das, Mitun (2017) Effect of trace elements on the sintering effect of fish scale derived hydroxyapatite and its bioactivity. Ceramics International, 43 (17). pp. 15678-15684. ISSN 0272-8842

Anand, Akrity and Das, Mitun and Kundu, Biswanath and Balla, Vamsi Krishna and Bodhak, Subhadip and Gangadharan, S (2017) Plasma-Sprayed Ti6Al4V Alloy Composite Coatings Reinforced with In Situ Formed TiB-TiN. Journal of Thermal Spray Technology, 26 (8). pp. 2013-2019. ISSN 1059-9630

Mohammad, Ashfaq and Al-Ahmari, Abdulrahman M and Balla, V K and Das, Mitun and Datta, Susmit and Yadav, Devinder and Ram, G D Janaki (2017) In vitro wear, corrosion and biocompatibility of electron beam melted gamma-TiAl. Materials & Design, 133. pp. 186-194. ISSN 0261-3069

Pal, Anindya and Paul, Sudeep and Choudhury, Amit Roy and Balla, V K and Das, Mitun and Sinha, Arijit (2017) Synthesis of hydroxyapatite from Lates calcarifer fish bone for biomedical applications. Materials Letters, 203. pp. 89-92. ISSN 0167-577X

Pal, Anindya and Maity, Shubhadeep and Chabri, Sumit and Bera, Supriya and Roy Chowdhury, Amit and Das, Mitun and Sinha, Arijit (2017) Mechanochemical synthesis of nanocrystalline hydroxyapatite from Mercenaria clam shells and phosphoric acid. Biomedical Physics & Engineering Express, 3 (1). Art No-015010.

Samanta, Aniruddha and Chakraborty, Himel and Bhattacharya, Manjima and Ghosh, Jiten and Sreemany, Monjoy and Bysakh, Sandip and Rane, Ramkrishna and Joseph, Alphonsa and Jhala, Ghanshyam and Mukherjee, Subroto and Das, Mitun and Mukhopadhyay, Anoop Kumar (2017) Nanotribological response of a plasma nitrided bio-steel. Journal of the Mechanical Behavior of Biomedical Materials, 65. pp. 584-599. ISSN 1751-6161

Datta, Susmit and Das, Mitun and Balla, V K (2017) Two-Step Electrochemical Pretreatment and Electrodeposition of Silver on Stainless Steel. Journal of the Electrochemical Society, 164 (7). D463-D468. ISSN 0013-4651

Agarwal, Shivam and Sarkar, Soumya and Das, Mitun and Dixit, Amit Rai (2016) Tribo-mechanical characterization of spark plasma sintered chopped carbon fibre reinforced silicon carbide composites. Ceramics International, 42 (16). pp. 18283-18288. ISSN 0272-8842

Roy, Snigdha and Das, Mitun and Mallik, Awadesh Kumar and Balla, V K (2016) Laser melting of titanium-diamond composites: Microstructure and mechanical behavior study. Materials Letters, 178. pp. 284-287. ISSN 0167-577X

Revathi, A and Magesh, S and Balla, Vamsi Krishna and Das, Mitun and Manivasagam, Geetha (2016) Current advances in enhancement of wear and corrosion resistance of titanium alloys - a review. Materials Technology, 31 (12). pp. 696-704. ISSN 1066-7857

Balla, V K and Das, Mitun and Mohammad, Ashfaq and Al-Ahmari, Abdulrahman M (2016) Additive Manufacturing of γ-TiAl: Processing, Microstructure, and Properties. Advanced Engineering Materials, 18 (7). pp. 1208-1215. ISSN 1438-1656

Roy, Sandipan and Khutia, Niloy and Das, Debdulal and Das, Mitun and Balla, V K and Bandyopadhyay, Amit and Roy Chowdhury, Amit (2016) Understanding compressive deformation behavior of porous Ti using finite element analysis. Materials Science & Engineering C-Materials for Biological Applications, 64. pp. 436-443. ISSN 0928-4931

Jana, Anuradha and Dandapat, Nandadulal and Das, Mitun and Balla, Vamsi Krishna and Chakraborty, Shirshendu and Saha, Rajnarayan and Mallik, Awadesh Kumar (2016) Severe wear behaviour of alumina balls sliding against diamond ceramic coatings. Bulletin of Materials Science, 39 (2). pp. 573-586. ISSN 0250-4707

Das, Mitun and Balla, V K and Kumar, T S Sampath and Bandyopadhyay, Amit and Manna, Indranil (2016) Tribological, electrochemical and in vitro biocompatibility properties of SiC reinforced composite coatings. Materials & Design, 95. pp. 510-517. ISSN 0261-3069

Marattukalam, Jithin J and Singh, Amit Kumar and Datta, Susmit and Das, Mitun and Balla, Vamsi Krishna and Bontha, Srikanth and Kalpathy, Sreeram K (2015) Microstructure and corrosion behavior of laser processed NiTi alloy. Materials Science & Engineering C-Materials for Biological Applications, 57. pp. 309-313. ISSN 0928-4931

Mantrala, Kedar M and Das, Mitun and Balla, Vamsi Krishna and Rao, Ch Srinivasa and Rao, V V S Kesava (2014) Laser-deposited CoCrMo alloy: Microstructure, wear, and electrochemical properties. Journal of Materials Research, 29 (17, SI). pp. 2021-2027. ISSN 0884-2914

Dey, Sangeeta and Das, Mitun and Balla, Vamsi Krishna (2014) Effect of hydroxyapatite particle size, morphology and crystallinity on proliferation of colon cancer HCT116 cells. Materials Science and Engineering: C Materials for Biological Applications, 39. pp. 336-339. ISSN 0928-4931

Das, Mitun and Bhattacharya, Kaushik and Dittrick, Stanley A. and Mandal, Chitra and Balla, Vamsi Krishna and Kumar, T S Sampath and Bandyopadhyay, Amit and Manna, Indranil (2014) In situ synthesized TiB-TiN reinforced Ti6Al4V alloy composite coatings: Microstructure, tribological and in-vitro biocompatibility. Journal of the Mechanical Behavior of Biomedical Materials, 29 (SI). pp. 259-271. ISSN 1751-6161

Balla, Vamsi Krishna and Das, Mitun and Bose, Sreyashree and Ram, G D Janaki and Manna, Indranil (2013) Laser surface modification of 316 L stainless steel with bioactive hydroxyapatite. Materials Science and Engineering: C Materials for Biological Applications, 33 (8). pp. 4594-4598. ISSN 0928-4931

Das, Mitun and Balla, Vamsi Krishna and Kumar, T S Sampath and Manna, Indranil (2013) Fabrication of biomedical implants using laser engineered net shaping (LENS (TM)). Transactions of the Indian Ceramic Society, 72 (3). pp. 169-174. ISSN 0371-750X

Das, Mitun and Balla, Vamsi Krishna and Basu, Debabrata and Manna, Indranil and Kumar, T. S. Sampath and Bandyopadhyaya, Amit (2012) Laser processing of in situ synthesized TiB-TiN-reinforced Ti6A14V alloy coatings. Scripta Materialia, 66 (8). pp. 578-581. ISSN 1359-6462

Das, Mitun and Ghatak, Sankar (2012) Synthesis of boron nitride from boron containing poly(vinyl alcohol) as ceramic precursor. Bulletin of Materials Science, 35 (1). pp. 99-102. ISSN 0250-4707

Das, Mitun and Bysakh, Sandip and Basu, Debabrata and Kumar, T. S. Sampath and Balla, Vamsi Krishna and Bose, Susmita and Bandyopadhyay, Amit (2011) Microstructure, mechanical and wear properties of laser processed SiC particle reinforced coatings on titanium. Surface & Coatings Technology , 205 (19). pp. 4366-4373. ISSN 0257-8972

Paul, Goutam and Das, Mitun and Ghatak, Sankar and Sarkar, S and Nagahanumaiah, . and Mitra, S (2011) Investigation on the effect of spark gap in dry µ-electro discharge machining of SiC-10BN nano-composite. International Journal of Manufacturing Technology and Management, 24 (1-4). pp. 71-87. ISSN 1368-2148

Paul, Goutam and Das, Mitun and Ghatak, Sankar and Sarkar, S and Mitra, S (2011) An investigation on electro discharge micro-drilling of SiC-20% BN composite. International journal of Materrials and Structural integrity, 5 (4). pp. 348-361. ISSN 1745-0055

Das, Mitun and Ghosh, Jiten and Basu, A K (2010) Effect of activation on boron nitride coating on carbon fiber. CERAMICS INTERNATIONAL, 36 (8). pp. 2511-2514. ISSN 0272-8842

Das, Mitun and Balla, Vamsi Krishna and Basu, Debabrata and Bose, Susmita and Bandyopadhyay, Amit (2010) Laser processing of SiC-particle-reinforced coating on titanium. SCRIPTA MATERIALIA, 63 (4). pp. 438-441. ISSN 1359-6462

Das, Mitun and Basu, A K and Ghatak, Sankar and Joshi, Amish G (2009) Carbothermal synthesis of boron nitride coating on PAN carbon fiber. Journal of the European Ceramic Society, 29 (10). pp. 2129-2134. ISSN 0955-2219

Ghosh, Jiten and Mazumdar, S and Das, Mitun and Ghatak, Sankar and Basu, A K (2008) Microstructural characterization of amorphous and nanocrystalline boron nitride prepared by high-energy ball milling. Materials Research Bulletin, 43 (4). pp. 1023-1031. ISSN 0025-5408

Thesis

Das, Mitun (2015) Laser Processing of Ceramic Reinforced Titanium Matrix Composite Coatings for Load Bearing Implant Applications. PhD thesis, Indian Institute of Technology, Madras.