Acharya, Rituparna and Chakraborty, Monisha and Chakraborty, Jui (2020) An in vitro comparative study of layered-double hydroxide nanoconjugate in the delivery of small interference and short-hairpin ribonucleic acid. Bulletin of Materials Science, 43 (1). Art No-10. ISSN 0250-4707

Agarwal, Swarnima and Saha, Shreya and Balla, V K and Pal, Aniruddha and Barui , Ananya and Bodhak , Subhadip (2020) Current Developments in 3D Bioprinting for Tissue and Organ Regeneration–A Review. Frontiers in Mechanical Engineering, 6. Art No- 589171. ISSN 2297-3079

Akilan, Arulselvan Arumugham and Gokce, Azim and Debnath, Subrata and Balla, V K and Kate, Kunal H and Atre, Sundar V (2020) Laser powder bed fusion of in-situ composites using dry-mixed Ti6Al4V and Si3N4 powder. Journal of Manufacturing Processes, 59. pp. 43-50. ISSN 1526-6125

Anand, Akrity and Das, Piyali and Nandi, Samit Kumar and Kundu, Biswanath (2020) Development of antibiotic loaded mesoporous bioactive glass and its drug release kinetics. Ceramics International, 46 (4). pp. 5477-5483. ISSN 0272-8842

Balla, V K and Tadimeti, Jogi Ganesh Dattatreya and Kate, Kunal H and Satyavolu, Jagannadh (2020) 3D printing of modified soybean hull fiber/polymer composites. Materials Chemistry and Physics, 254. Art No-123452. ISSN 0254-0584

Balla, Vamsi Krishna and Kate, Kunal H and Dattatreya Tadimeti, Jogi Ganesh and Satyavolu, Jagannadh (2020) Influence of Soybean Hull Fiber Concentration on the Water Absorption and Mechanical Properties of 3D-Printed Thermoplastic Copolyester/Soybean Hull Fiber Composites. Journal of Materials Engineering and Performance, 29 (9, SI). pp. 5582-5593. ISSN 1059-9495

Dandapat, Nandadulal and Ghosh, Sumana (2020) Effect of alumina impurity on microstructure and properties of alumina based conventionally brazed joints. Indian Journal of Engineering and Materials Sciences, 27 (1). pp. 96-103. ISSN 0971-4588

Dandapat, Nandadulal and Ghosh, Sumana (2020) Interfacial and Cross-sectional Studies of Thermally Cycled Alumina-Monel Brazed Joint. Transactions of the Indian Ceramic Society, 79 (3). pp. 152-157. ISSN 0371-750X

Elshazly, Noha and Khalil, Abdelaziz and Saad, Manal and Patruno, Marco and Chakraborty, Jui and Marei, Mona (2020) Efficacy of Bioactive Glass Nanofibers Tested for Oral Mucosal Regeneration in Rabbits with Induced Diabetes. Materials, 13 (11). Art No-2603. ISSN 2603

Jana, Anuradha and Das, Mitun and Balla, Vamsi Krishna (2020) Effect of heat treatment on microstructure, mechanical, corrosion and biocompatibility of Mg-Zn-Zr-Gd-Nd alloy. Journal of Alloys and Compounds, 821. Art No-153462. ISSN 0925-8388

Jeyachandran, Praveen and Bontha, Srikanth and Bodhak, Subhadip and Balla, Vamsi Krishna and Kundu, Biswanath and Doddamani, Mrityunjay (2020) Mechanical behaviour of additively manufactured bioactive glass/high density polyethylene composites. Journal of the Mechanical Behavior of Biomedical Materials, 108. Art No-103830. ISSN 1751-6161

Kumar, Manoj and Das, Mitun and Majumdar, Jyotsna Dutta and Manna, Indranil (2020) Development of graded composition and microstructure on Inconel 718 by laser surface alloying with Si, Al and ZrB2 for improvement in high temperature oxidation resistance. Surface & Coatings Technology , 402. Art No-126345. ISSN 0257-8972

Lalzawmliana, V. and Anand, Akrity and Roy, Mangal and Kundu, Biswanath and Nandi, Samit Kumar (2020) Mesoporous bioactive glasses for bone healing and biomolecules delivery. Materials Science & Engineering C-Materials for Biological Applications, 106. Art No-110180. ISSN 0928-4931

Mahato, Arnab and Sandy, Zhang and Bysakh, Sandip and Hupa, Leena and Das, Indranee and Bhattacharjee, Promita and Kundu, Biswanath and De, Goutam and Nandi, Samit K and Vallittu, Pekka and Balla, V K and Bhattacharya, Manjima (2020) Development of nano-porous hydroxyapatite coated e-glass for potential bone-tissue engineering application: An in vitro approach. Materials Science & Engineering C-Materials for Biological Applications, 111. ISSN 0928-4931

Onbattuvelli, Valmikanathan P. and Enneti, Ravi K and Simonsen, John and Kate, Kunal H and Balla, Vamsi K and Atre, Sundar V (2020) Structure and thermal stability of cellulose nanocrystal/polysulfone nanocomposites. Materials Today Communications, 22. Art No. ISSN 2352-4928

Rakesh, K R and Bontha, Srikanth and Ramesh, M R and Das, Mitun and Balla, Vamsi Krishna (2020) Degradation, wettability and surface characteristics of laser surface modified Mg-Zn-Gd-Nd alloy. Journal of Materials Science-Materials in Medicine, 31 (5). Art No-42. ISSN 0957-4530

Saha, Suman and Bhattacharjee, Arnab and Rahaman, Sk Hasanur and Basu, Arindam and Chakraborty, Jui (2020) Synergistic anti-cancer activity of etoposide drug loaded calcium aluminium layered double hydroxide nanoconjugate for possible application in non small cell lung carcinoma. Applied Clay Science, 188. Art No-105496. ISSN 0169-1317

Sahoo, Souvik and Sinha, Arijit and Dasb, Mitun (2020) Synthesis, characterization and in vitro biocompatibility study of strontium titanate ceramic: A potential biomaterial. Journal of the Mechanical Behavior of Biomedical Materials, 102. Art No-103494. ISSN 1751-6161

Samanta, Aniruddha and Rane, Ramkrishna and Kundu, Biswanath and Chanda, Dipak Kr and Ghosh, Jiten and Bysakh, Sandip and Jhala, Ghanshyam and Joseph, Alphonsa and Mukherjee, Subroto and Das, Mitun and Mukhopadhyay, Anoop Kumar (2020) Bio-tribological response of duplex surface engineered SS316L for hip-implant application. Applied Surface Science, 507. Art No-145009. ISSN 0169-4332

Sarkar, Chandrani and Anuvrat, Kumar and Garai, Subhadra and Sahu, Sumanta Kumar and Chakraborty, Jui (2020) One pot method to synthesize three-dimensional porous hydroxyapatite nanocomposite for bone tissue engineering. Journal of Porous Materials, 27 (1). pp. 225-235. ISSN 1380-2224

Sarkar, Soumya and Biswas, Mita and Halder, Rupa and Bandyopadhyay, Siddhartha (2020) Spark plasma sintering processed alpha-SiAlON bonded tungsten carbide: Densification, microstructure and tribomechanical properties. Materials Chemistry and Physics, 248. Art No-122955. ISSN 0254-0584

Sengupta, Somoshree and Khatua, Chandra and Pal, Aniruddha and Bodhak, Subhadip and Balla, V K (2020) Influence of ultrasound and magnetic field treatment time on carcinoma cell inhibition with drug carriers: an in vitro study. Ultrasound in Medicine and Biology, 46 (10). pp. 2752-2764. ISSN 0301-5629

Sharma, Vidushi and Bose, Suryasarathi and Kundu, Biswanath and Bodhak, Subhadip and Mitun, Das and Balla, V K and Basu, Bikramjit (2020) Probing the Influence of γ‑Sterilization on the Oxidation,Crystallization, Sliding Wear Resistance, and Cytocompatibility of Chemically Modified Graphene-Oxide-Reinforced HDPE/UHMWPEN a nocomposites and Wear Debris. ACS Biomaterials Science & Engineering, 6 (3). pp. 1462-1475. ISSN 2373-9878

Sharma, Vidushi and Bose, Suryasarathi and Kundu, Biswanath and Bodhak, Subhadip and Mitun, Das and Balla, Vamsi Krishna and Basu, Bikramjit (2020) Probing the Influence of gamma-Sterilization on the Oxidation, Crystallization, Sliding Wear Resistance, and Cytocompatibility of Chemically Modified Graphene-Oxide-Reinforced HDPE/UHMWPE Nanocomposites and Wear Debris. ACS Biomaterials Science & Engineering, 6 (3). pp. 1462-1475. ISSN 2373-9878

Shukla, Mayur and Ghosh, Sumana (2020) Microwave-assisted alumina-zirconia brazed joint for microwave tubes. Journal of the Australian Ceramic Society, 56 (3). pp. 873-883. ISSN 0004-881X

Singh, Paramjot and Balla, V K and Tofangchi, Alireza and Atre, Sundar and Kate, Kunal H (2020) Printability studies of Ti-6Al-4V by metal fused filament fabrication (MF3). International Journal of Refractory Metals & Hard Materials , 91. Art No-105249. ISSN 0263-4368

Singh, Paramjot and Shaikh, Qasim and Balla, V K and Atre, Sundar V and Kate, Kunal H (2020) Estimating Powder-Polymer Material Properties Used in Design for Metal Fused Filament Fabrication (DfMF(3)). JOM, 72 (1). pp. 485-495. ISSN 1047-4838

Subramanian, Bhuvaneshwaran and Agarwal, Tarun and Roy, Arpita and Parida, Sheetal and Kundu, Biswanath and Maiti, Tapas Kumar and Basak, Piyali and Guha, Sujoy K (2020) Synthesis and characterization of PCL-DA:PEG-DA based polymeric blends grafted with SMA hydrogel as bio-degradable intrauterine contraceptive implant. Materials Science & Engineering C-Materials for Biological Applications, 116. Art No-111159. ISSN 0928-4931

Sudan, Kavish and Singh, Paramjot and Gokce, Azim and Balla, V K and Kate, Kunal H (2020) Processing of hydroxyapatite and its composites using ceramic fused filament fabrication (CF3). Ceramics International, 46 (15). pp. 23922-23931. ISSN 0272-8842