Dandapat, N and Ghosh, S (2019) Development of non-shrinkable ceramic composites for use in high-power microwave tubes. International Journal of Minerals Metallurgy and Materials, 26 (4). pp. 516-522. ISSN 1674-4799

Bhattacharya, P and Majumdar, Swachchha and Bandyopadhyay, S and Ghosh, S (2016) Recycling of tannery effluent from common effluent treatment plant using ceramic membrane based filtration process: A closed loop approach using pilot scale study. Environmental Progress & Sustainable Energy, 35 (1). pp. 60-69. ISSN 1944-7442

IN2004DE1758A, CSIR-CGCRI,India (2015) Process for production of wall and floor tiles from single ceramic component. 264562.

Ghosh, S (2015) Thermal properties of glass-ceramic bonded thermal barrier coating system. Transactions of Nonferrous Metals Society of China, 25 (2). pp. 457-464. ISSN 1003-6326

Mukhopadhyay, Tapas Kumar and Ghosh, S and Majumder, M and Ghatak, Sankar (2015) Consideration of Alternate Raw Materials for Porcelain Tile Manufacture: The Effect of the Incorporation of Fired Scrap and Pyrophyllite. Interceram: International Ceramic Review, 64 (1-2). pp. 20-27. ISSN 0020-5214

Ghosh, S and Dandapat, N and Balla, V K (2015) Preparation and in vitro characterization of fluroapatite based bioactive glass-ceramics for biomedical applications. In: 4th International Conference on Materials Processing and Characterzation (ICMPC, MAR 14, 2015, Gokaraju Rangaraju Inst Engin & Technol, Hyderabad, INDIA.

IN2006DE773A, CSIR-CGCRI,India (2014) Production of lanthanum chromite based oxide using a multipurpose chromium source. 264190.

Bradley, D A and Sani, Siti F Abdul and Alalawi, Amani I and Jafari, S M and Noor, Noramaliza M and Azhar, A R Hairul and Mahdiraji, Ghafour Amouzad and Tamchek, Nizam and Ghosh, S and Paul, Mukul Chandra and Alzimami, Khalid S and Nisbet, A and Maah, M J (2014) Development of tailor-made silica fibres for TL dosimetry. Radiation Physics and Chemistry, 104. pp. 3-9. ISSN 0969-806X

Kir'yanov, A V and Ghosh, S and Paul, Mukul Chandra and Barmenkov, Y O and Aboites, V and Kozlova, N S (2014) Ce-doped and Ce/Au-codoped alumino-phospho-silicate fibers: Spectral attenuation trends at high-energy electron irradiation and posterior low-power optical bleaching. Optical Materials Express, 4 (3). pp. 434-448. ISSN 2159-3930

Ghosh, S and Ghosh, A and Kar, T and Das, S and Das, Probal Kumar and Mukherjee, J and Banerjee, Rajat (2014) Role of carbon nanotubes on load dependent micro hardness of SWCNT-lead silicate glass composite. Ceramics International, 40 (2). pp. 2953-2958. ISSN 0272-8842

Ghosh, S and Paul, Mukul Chandra and Das, S (2014) Fabrication of silicon carbide semiconductor core optical fibre preform. In: 2013 INTERNATIONAL CONFERENCE ON MICROWAVE AND PHOTONICS (ICMAP), DEC 13-15, 2013, Dhanbad, INDIA.

Ghosh, S and Datta, S (2014) Surface Degradation Behaviour of MgO-Al2O3-TiO2-SiO2 based Glass-Ceramics. Transactions of the Indian Ceramic Society, 73 (3). pp. 216-220. ISSN 0371-750X

Ghosh, S and Paul, Mukul Chandra and Das, Shyamal and Dasgupta, Kamal and Bohra, D and Chaudhary, H S and Panwar, L and Bhatnagar, R K and Vaijapurkar, S G (2013) Radiation response behavior of carbon Co-doped aluminosilicate glass based optical fibre for use as radiation sensor. Sensor Letters, 11 (8). pp. 1408-1414. ISSN 1546-198X

Dragic, P and Ballato, J and Ballato, A and Morris, S and Hawkins, T and Law, P -C and Ghosh, S and Paul, Mukul Chandra (2012) Mass density and the Brillouin spectroscopy of aluminosilicate optical fibers. Optical Materials Express, 2 (11). pp. 1641-1654. ISSN 2159-3930

Ghosh, S and Ghosh, A and Kar, T and Das, S and Das, Prabal Kumar and Banerjee, Rajat (2012) Cushioning effect, enhanced localized plastic flow and thermal transport in SWCNT-lead silicate glass composite. Chemical Physics Letters, 547. pp. 58-62. ISSN 0009-2614

Ghosh, S and Chatterjee, S and Kundu, A and Maity, S and Saha, H (2012) Thermal analysis of cantilever MEMS based Low power microheater array for the selective detection of explosive and toxic gases. In: 1st International Symposium on Physics and Technology of Sensors, ISPTS-1, 8 -10 March, 2012, Pune.

Mukhopadhyay, Tapas Kumar and Ghosh, S and Ghatak, Sankar (2011) Phase analysis and microstructure evolution of a bone china body modified with scrap addition. Ceramics International, 37 (5). pp. 1615-1623. ISSN 0272-8842

Ghosh, A and Ghosh, S and Das, S and Das, P K and Majumder, D D and Banerjee, R (2010) Synthesis and electrical properties of a single walled carbon nanotube-borosilicate glass composite. Chemical Physics Letters, 496 (4-6). pp. 321-325. ISSN 0009-2614

Mukhopadhyay, Tapas Kumar and Ghosh, S and Ghosh, Jiten and Ghatak, Sankar and Maiti, Himadri Sekhar (2010) Effect of fly ash on the physico-chemical and mechanical properties of a porcelain composition. Ceramics International, 36 (3). pp. 1055-1062. ISSN 0272-8842

Ghosh, S and Dasgupta, S (2010) Synthesis, characterization and properties of nanocrystalline perovskite cathode materials. Materials Science-Poland , 28 (2). pp. 427-438. ISSN 0137-1339

Sarkar, Ritwik and Singh, Nahar and Ghosh, S and Mukhopadhyay, Tapas Kumar and Das, S K (2007) Singular clay for whiteware. Indoceram: Indian Ceramic Review, 44 (1). pp. 17-23.

Sarkar, Ritwik and Ghosh, S and Das, Swapan Kumar (2007) Waste silica from aluminium fluoride industries used for ceramic whitewares. American Ceramic Society Bulletin, 86 (10). pp. 9201-9207. ISSN 0002-7812

Mazumder, R and Ghosh, S and Mondal, P and Bhattacharya, Dipten and Dasgupta, S and Das, N and Tyagi, A K and Sivakumar, M and Takami, T and Ikuta, H (2006) Particle size dependence of magnetization and phase transition near T-N in multiferroic BiFeO3. Journal of Applied Physics, 100 (3). ISSN 0021-8979

Ghosh, S and Mukopadhyay, T. K. (2006) Multipurpose compositions for wall and floor tiles utilising pyrophyllite and common clay. Industrial Ceramics , 26 (2). pp. 100-106. ISSN 1121-7588

Roy, I and Ghosh, S and Dana, Kausik and Das, Swapan Kumar (2006) Development of high strength stoneware compositions utilizing ferrugineous and inferior grade china clays. Indoceram: Indian Ceramic Review, 43 (3). pp. 80-83.

Ghosh, S and Guha, A and Krishna, K M and Mukhopadhyay, Anoop Kumar and Maiti, Himadri Sekhar (2006) Tape cast multilayer composite of nano zirconia with high toughness. Materials and Manufacturing Processes , 21 (7 ). pp. 662-668. ISSN 1042-6914

Mukhopadhyay, Tapas Kumar and Ghosh, S and Chakraborti, S and Ghatak, Sankar (2005) Effect of sodium silicate on the durability of common building bricks. Interceram: International Ceramic Review, 54 (4). pp. 262-267. ISSN 0020-5214

Mukhopadhyay, Tapas Kumar and Sarkar, R and Das, S K and Ghosh, S and Ghatak, Sankar (2005) Effect of synthetic mullite aggregate on clay-based sol-bonded castable. American Ceramic Society Bulletin, 84 (11). pp. 9101-9106. ISSN 0002-7812

Mukhopadhyay, Tapas Kumar and Ghosh, S and Chakbrabarti, S and Ghatak, Sankar (2003) Utilization of lean clay in the development of quality building bricks. Industrial Ceramics, 23 (3). pp. 184-190. ISSN 1121-7588

Mukhopadhyay, Tapas Kumar and Das, M and Ghosh, S and Chakrabarti, S and Ghatak, Sankar (2003) Microstructure and thermo mechanical properties of a talc doped stoneware composition containing illitic clay. Ceramics International, 29 (5). pp. 587-597. ISSN 0272-8842

Ghosh, S (1996) Firing practice of ceramic industries in India: past, present and future. Indian Potter, 35 (2). pp. 10-14.

Chakrabarti, Omprakash and Ghosh, S and Mukerji, Joydeb (1994) Influence of grain-size, free silicon content and temperature on the strength and toughness of reaction-bonded silicon-carbide. Ceramics International, 20 (5). pp. 283-286. ISSN 0272-8842

Nandi, Ashok Kumar and Chaudhuri, A K and Thiagarajan, S and Ghosh, S (1993) A new approach to the preparation of IR transparent Ca12Al14O33 material. British Ceramic Transactions, 92 (2). pp. 81-82. ISSN 0967-9782

Kumar, A and Sen, S and Biswas, S K and Singh, N and Ghosh, S and Chakraborty, S (1991) Extrudable common clay fly ash-cylinder mixture for common brick manufacture. Indian Journal of Engineering, 21 (2). pp. 51-57. ISSN 2319-7757