A

Aggarwal, P S and Lele, R V and Mitra, B L (1977) Development of high strength whiteware bodies. Transactions of the Indian Ceramic Society, 36 (1). pp. 12-16. ISSN 0371-750X

Agrawal, P and Maiti, Kedar Nath (2008) Influence of hydrocyclone beneficiated clay blend on technological properties and colour indices of vitreous porcelain the body. Industrial Ceramics , 28 (3). pp. 195-204. ISSN 1121-7588

B

Basu, M K and Nayak, U N and Lele, R V (1979) Energy requirements and fuel efficiency in whiteware industry. Transactions of the Indian Ceramic Society, 38 (1). pp. 44-48. ISSN 0371-750X

Bhattacharyya, Sunipa and Das, Swapan Kumar and Dana, Kausik and Mitra, Nirendra Krishna (2007) Titania doped triaxial porcelain: Enhancement of strength by controlled heat treatment. BULLETIN OF MATERIALS SCIENCE, 30 (3). pp. 231-234. ISSN 0250-4707

Bhushan, B and Das, B and Sen, S (1966) Zircon opacifiers: Their preparation and performance in glazes. Transactions of the Indian Ceramic Society, 25 (1). pp. 97-106. ISSN 0371-750X

C

Chaudhuri, S P (2001) Electrical resistance of mullite porcelain and its probable use as temperature sensor. Interceram: International Ceramic Review, 50 (2). pp. 98-101. ISSN 0020-5214

Chaudhuri, S P and Sarkar, P (1995) Constitution of porcelain before and after heat-treatment .1. mineralogical composition. Journal of the European Ceramic Society, 15 (10). pp. 1031-1035. ISSN 0955-2219

Chaudhuri, S P and Sarkar, P (1996) Constitution of porcelain before and after heat-treatment .2. Aspect ratio and size-distribution of mullite. Journal of the European Ceramic Society, 16 (8). pp. 851-855. ISSN 0955-2219

Chaudhuri, S P and Sarkar, P and Chakraborty, A K (1999) Electrical resistivity of porcelain in relation to constitution. Ceramics International, 25 (1). pp. 91-99. ISSN 0272-8842

Chaudhuri, S P and Sengupta, K and Mitra, N (1992) Ceramic properties of hard porcelain in relation to mineralogical composition and microstructure .5. electrical-resistivity. Canadian Ceramics Quarterly-Journal of the Canadian Ceramic Society , 61 (4). pp. 243-248. ISSN 0831-2974

D

Dana, Kausik and Das, S K (2004) Partial substitution of feldspar by BF slag in triaxial porcelain: Phase and microstructural evolution. Journal of the European Ceramic Society, 24 (15-16). pp. 3833-3839. ISSN 0955-2219

Dana, Kausik and Das, S K (2004) Evolution of microstructure in flyash-containing porcelain body on heating at different temperatures. Bulletin of Materials Science, 27 (2). pp. 183-188. ISSN 0250-4707

G

Ghosh, S N and Guha, S K (1977) Evaluation of some clays from Rajasthan for utilization in the whiteware industry. Transactions of the Indian Ceramic Society, 36 (4). pp. 88-98. ISSN 0371-750X

H

Haldar, Manas Kamal and Das, Swapan Kumar (2012) Effect of substitution of sand stone dust for quartz and clay in triaxial porcelain composition. Bulletin of Materials Science, 35 (5). pp. 897-904. ISSN 0250-4707

L

Lele, R V (1954) Chemical porcelain. CGCRI Bulletin, 2 (1). pp. 5-13. ISSN 0008-9397

M

Machhoya, B B and Maiti, Kedar Nath (2004) Utilization of fired scrap in the production of crockery and tablewares. Indoceram: indian Ceramic Review, 40 (4). pp. 1-54.

Maiti, Kedar Nath (2001) Latest trends in production of porcelain and fine chinawares. Indoceram: Indian Ceramic Review, 38 (1). pp. 1-13.

Maiti, Kedar Nath (1993) Strength behaviour of thermally shocked new porcelains. Interceram: International Ceramic Review, 42 (4). 219-220,222. ISSN 0020-5214

Maiti, Kedar Nath (2003) Trends in tableware production with emphasis on ceramic colours and stains. Indoceram: Indian Ceramic Review, 40 (1). pp. 1-15.

Maiti, Kedar Nath and Kumar, Sachchidananda (1992) Effect of glass-ceramics and sillimanite sand additions on microstructure and properties of porcelain. Ceramics International, 18 (6). pp. 403-412. ISSN 0272-8842

Maiti, Kedar Nath and Kumar, Sachchidananda (1992) Microstructure and properties of a new porcelain composition containing crystallizing glasses as replacement for feldspar. British Ceramic Transactions And Journal, 91 (1). pp. 19-24. ISSN 0307-7357

Maiti, Kedar Nath and Mukhopadhyay, S S (1993) Importance of chemical and rational analyses of ceramic raw materials for understanding of some important parameters that govern forming and firing properties of whitewares. Indian Potter.

Maiti, Kedar Nath and Prasad, C S (1989) Effect of particle size on the vitrification temperature and fired properties of conventional white stonewares. Transactions of the Indian Ceramic Society, 48 (6). pp. 119-127. ISSN 0371-750X

Maity, Soumen and Chaudhuri, Jayanta and Sarkar, Bijit Kumar (1994) Cyclic fatigue behaviour of porcelain under repeated impact. Transactions of the Indian Ceramic Society, 53 (1). pp. 1-7. ISSN 0371-750X

Maity, Soumen and Mukhopadhyay, Tapas Kumar and Sarkar, Bijit Kumar (1997) Strength of sillimanite sand reinforced porcelain subjected to thermal shock. Journal of the European Ceramic Society, 17 (5). pp. 749-752. ISSN 0955-2219

Maity, Soumen and Sarkar, Bijit Kumar (1996) Development of high-strength whiteware bodies. Journal of the European Ceramic Society, 16 (10). pp. 1083-1088. ISSN 0955-2219

Maity, Soumen and Sarkar, Bijit Kumar (1995) Impact fatigue of a porcelain ceramic. International Journal of Fatigue, 17 (2). pp. 107-109. ISSN 0142-1123

Mitra, B L and Biswas, Narayan Chandra and Sen, S K and Aggarwal, P S (1992) Development of relatively fast-fired crockeryware from wollastonite. Transactions of the Indian Ceramic Society, 51 (5). pp. 110-112. ISSN 0371-750X

Mukherjee, S K (1987) Salt glazed pipe industry of Gujarat and its quality control studies. Indian Potter, 26. pp. 19-22.

Mukherjee, S K and Machhoya, B B (1987) Application of ceramic glaze. Indian Potter, 26 (3).

Mukherjee, S K and Savsani, R M and Maiti, Kedar Nath (1997) Manufacture of steatite porcelain for electrical application. Indian Potter, 35 (2). pp. 1-7.

Mukherji, S K and Machhoya, B B (1993) Some hight-hights on vitreous china sanitaryware. Indian Potter, 31 (1).

Mukherji, S K and Machhoya, B B and Savsani, R M and Vyas, D R and Dan, Tapan Kumar (1993) The utilisation of fly ash in the preparation of ceramic tableware and artware. British Ceramic Transactions, 92 (6). pp. 254-257. ISSN 0967-9782

Mukhopadhyay, Tapas Kumar and Dan, Tapan Kumar (1996) Energy conservation in the whiteware industry - The Indian scenario. Journal of Scientific & Industrial Research, 55 (2). pp. 73-85. ISSN 0022-4456

Mukhopadhyay, Tapas Kumar and Ghosh, S and Majumder, M and Ghatak, Sankar (2015) Consideration of Alternate Raw Materials for Porcelain Tile Manufacture: The Effect of the Incorporation of Fired Scrap and Pyrophyllite. Interceram: International Ceramic Review, 64 (1-2). pp. 20-27. ISSN 0020-5214

Mukhopadhyay, Tapas Kumar and Singh, K C and Dan, Tapan Kumar (1997) Development of a suitable technology for manufacturing sanitaryware in the small scale sector. Indian Potter, 35 (3). pp. 1-11.

O

Oluseyi, Anjanaku Koluseyi and Pal, Mousumi and Das, Swapan Kumar (2013) Utilization of Cr-doped soda-lime scrap glass in porcelain body. Indoceram of AIPMA, 2 (1). pp. 1-5. ISSN 2321-1970

P

Pal, Mousumi and Das, Sukhen and Das, Swapan Kumar (2015) Anorthite porcelain: synthesis, phase and microstructural evolution. Bulletin of Materials Science, 38 (2). pp. 551-555. ISSN 0250-4707

Pal, Mousumi and Das, Sukhen and Gupta, Surajit and Das, Swapan Kumar (2016) Thermal analysis and vitrification behavior of slag containing porcelain stoneware body. Journal of Thermal Analysis and Calorimetry, 124 (3). pp. 1169-1177. ISSN 1388-6150

Pal, Mousumi and Das, Swapan Kumar (2018) Phase and microstructural evolution in quartz-free porcelain tile compositions. Journal of the Australian Ceramic Society, 54 (1). pp. 109-117. ISSN 0004-881X

Prasad, S and Srivastava, V K and Sharma, L K (2015) Roller Head Jigger Machine for Table Ware Industries. Indoceram of AIPMA, 3 (1). pp. 7-10. ISSN 2321-1970

Prasad, C S and Kumar, D and Karmakar, D P and Gupta, A K and Chakrabarti, S (2002) Development of a volume stable stoneware body for manufacturing crockery. Transactions of the Indian Ceramic Society, 61 (4). pp. 168-172. ISSN 0371-750X

Prasad, C S and Maiti, Kedar Nath (1991) Utilization of sericitic pyrophyllite in whiteware manufacture. Indian Potter, 30 (3). pp. 1-9.

Prasad, C S and Maiti, Kedar Nath and Venugopal, R (2001) Effect of rice husk ash in whiteware compositions. Ceramics International, 27 (6). pp. 629-635. ISSN 0272-8842

Prasad, C S and Maiti, Kedar Nath and Venugopal, R (2002) Effect of silica fume addition on the properties of whiteware compositions. Ceramics International, 28 (1). pp. 9-15. ISSN 0272-8842

Prasad, C S and Maiti, Kedar Nath and Venugopal, R (2003) Effect of substitution of quartz by rice husk ash and silica fume on the properties of whiteware compositions. Ceramics International, 29 (8). pp. 907-914. ISSN 0272-8842

Prasad, C S and Maiti, Kedar Nath and Venugopal, R (1991) Replacement of quartz and potash feldspar with sericitic pyrophyllite in whiteware components. Interceram: International Ceramic Review, 40 (2). pp. 94-98. ISSN 0020-5214

Prasad, C S and Maiti, Kedar Nath and Venugopal, R (1997) Thermal behaviour of whiteware bodies containing sericitic pyrophyllite. Interceram: International Ceramic Review, 46 (3). pp. 154-161. ISSN 0020-5214

R

Roy, S B (1953) Factors affecting the properties of typical zircon porcelains. Part II. Journal of Scientific & Industrial Research, 12B (2). pp. 56-59. ISSN 0022-4456

S

Sarkar, Ritwik and Ghosh, S and Das, Swapan Kumar (2007) Waste silica from aluminium fluoride industries used for ceramic whitewares. American Ceramic Society Bulletin, 86 (10). pp. 9201-9207. ISSN 0002-7812

Sarkar, Ritwik and Singh, Nahar and Ghosh, S and Mukhopadhyay, Tapas Kumar and Das, S K (2007) Singular clay for whiteware. Indoceram: Indian Ceramic Review, 44 (1). pp. 17-23.

Sen, B K and Das, S R and Guha, S K (1977) Evaluation of some Indian bentonites for their utilization in the whiteware industry. Transactions of the Indian Ceramic Society, 36 (6). pp. 145-151. ISSN 0371-750X

Shah, H M and Savsani, R M and Dan, Tapan Kumar (1991) Some highlights on the translucency of porcelain body. Indian Potter, 30 (4). pp. 9-14.

Siddiqui, A R and Pal, M and Bhattacharya, D and Das, S K (2014) Iron and steel slag: an alternative source of raw materials for porcelain ceramics. Global Nest Journal, 16 (4). pp. 587-596. ISSN 1790-7632

Singh, K C and Kumar, D and Sharma, L K (2005) Changing scenario of Khurja whiteware cluster. Indoceram: Indian Ceramic Review, 42 (2). pp. 7-12.

Singh, K C and Prasad, C S and Sharma, L K and Kumar, D and Karmakar, D P and Ram, Yad and Singh, A (2008) Cluster approach for the development of whiteware industry. Indoceram: Indian Ceramic Review, 45 (1). pp. 1-7.

Sinha, Prasanta Kumar and Mandal, S and Kundu, Dipali (2007) Leaching of lead and cadmium from glass dinnerware. Journal of Engironmental Science and Engineering, 49 (1). pp. 58-61. ISSN 0367-827 X

T

Tripathi, Himansu Shekhar and Das, S K and Mukherjee, B and Ghosh, Arup (2007) Sintered mullite from aluminous ore for refractory application. American Ceramic Society Bulletin, 86 (5). pp. 9301-9306. ISSN 0002-7812