Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | B | C | D | G | H | K | M | N | P | R | S | W
Number of items at this level: 68.

A

Achuthan, Asha T and Maiti, Kedar Nath (2007) Examination of industrial practice of ceramic glaze making with emphasis on particle size distribution. Transactions of the Indian Ceramic Society, 66 (2). pp. 89-96. ISSN 0371-750X

Achuthan, Asha T and Maiti, Kedar Nath (2006) Influence of grinding on the properties of ceramic glazes. Industrial Ceramics , 26 (3). pp. 181-189. ISSN 1121-7588

Achuthan, Asha T and Maiti, Kedar Nath (2006) Optimizing industrial production of ceramic glazes for the best performance. Indoceram: Indian Ceramic Review, 43 (3). pp. 64-72.

Anil, Asha and Peer Mohamed, A and Maiti, Kedar Nath (2009) Evaluation of Dry as Well as Thermo-Mechanical Properties of Porcelain Compositions Containing Colloidal Silica as an Additive. Transactions of the Indian Ceramic Society, 68 (2). pp. 99-104. ISSN 0371-750X

B

1711/DEL/97,CSIR-CGCRI (1997) Improved compositions useful for the preparation of alpha-beta sialon ceramic. 199679.

Banerjee, Suparna and Sujatha Devi, P (2008) Understanding the effect of calcium on the properties of ceria prepared by a mixed fuel process. SOLID STATE IONICS, 179 (17-18). pp. 661-669. ISSN 0167-2738

IN2008DE1238A, CSIR_CGCRI, India (2016) An improved process for preparation of boron nitride coated carbon fiber. 270978.

Bharati, S and Sinha, Mithiles Kumar and Basu, Debabrata (2005) Hydroxyapatite coating by biomimetic method on titanium alloy using concentrated SBF. Bulletin of Materials Science, 28 (6). pp. 617-621. ISSN 0250-4707

Bhat, Abhimanyu and Balla, Vamsi Krishna and Bysakh, Sandip and Basu, Debabrata and Bose, Susmita and Bandyopadhyay, Amit (2011) Carbon nanotube reinforced Cu-10Sn alloy composites: Mechanical and thermal properties. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 528 (22-23). pp. 6727-6732. ISSN 0921-5093

Bhoi, D and Mandal, P and Choudhury, Pranab (2008) Normal-state transport properties of PrFeAsO1-xFy superconductor. Physica C-Superconductivity and its Applications, 468 (22). pp. 2275-2278. ISSN 0921-4534

3357/DEL/97, CSIR-CGCRI (1997) An improved process for coating mild steel surfaces by vitreous enamel coating materials. 197328.

Biswas, K K and Datta, S and Das, S K and Ghosh, M C and Mazumder, A and Roy, A (1986) Glass-ceramic coatings for steel and nimonic alloy. Transactions of the Indian Ceramic Society, 45 (2). pp. 43-45. ISSN 0371-750X

C

Chakrabarti, O P and Das, P K and Mondal, S (2001) Study of indentation induced cracks in MoSi2-reaction bonded SiC ceramics. Bulletin of Materials Science, 24 (2). 181 -184 . ISSN 0250-4707

Chakrabarti, Omprakash and Weisensel, L and Sieber, H (2005) Reactive melt infiltration processing of biomorphic Si-Mo-C ceramics from wood. Journal of the American Ceramic Society, 88 (7). pp. 1792-1798. ISSN 0002-7820

IN2004DE645A, CSIR-CGCRI, India (2012) A process of producing low thermal expansion lithium aluminosilicate ceramics. 254128.

Chakraborty, Abhijit and Kundu, Biswanath and Basu, Debabrata and Pal, Tamal Kanti and Nandi, Samit Kumar (2011) In vivo bone response and interfacial properties of titanium-alloy implant with different designs in rabbit model with time. Indian Journal of Dental Research, 22 (2). pp. 277-284. ISSN 0970-9290

Chakraborty, G and Bandyopadhyay, S and Haldar, B and Das, R (2011) Diffusion phenomena in the alpha-Si(3)N(4)-solid solution and 304L stainless steel static interaction couple. Ceramics International, 37 (3). pp. 1011-1016. ISSN 0272-8842

IN2007DE1759A, CSIR-CGCRI,India (2014) A process for the preparation of protein mediated calcium hydroxyapatite (Hap) coating on metal substrate. 263591.

US2008175812A, CSIR-CGCRI,India (2011) Process for the preparation of protein mediated calcium hydroxyapatite (HAp) coating on metal substrate. 8039038.

Chakraborty, Jui and Daneu, Nina and Recnik, Aleksander and Chakraborty, Manjusha and Dasgupta, Sudip and Ghosh, Jiten and Sengupta, Somoshree and Mazumdar, Sujata and Sinha, Mithlesh K. and Basu, Debabrata (2011) Stepwise formation of crystalline apatite in the biomimetic coating of surgical grade SS 316L substrate: A TEM analysis. Journal of the Taiwan Institute of Chemical Engineers, 42 (4). pp. 682-687. ISSN 1876-1070

Chakraborty, Jui and Dey Sarkar, Soumi and Chatterjee, Saradiya and Sinha, Mithlesh Kumar and Basu, Debabrata (2008) Self-assembled structures of hydroxyapatite in the biomimetic coating on a bioinert ceramic substrate. COLLOIDS AND SURFACES B-BIOINTERFACES, 66 (2). pp. 295-298. ISSN 0927-7765

Chakraborty, S and Pyare, R (2008) Crystallisation behaviour and in vitro characterisation of TiO2 doped spodumene glass ceramics. Advances in Applied Ceramics, 107 (2). pp. 70-75. ISSN 1743-6753

Chakraborty, Shirshendu and Banerjee, Dibyajyoti and Ray, Indrani and Sen, Amarnath (2008) Detection of biomarker in breath: A step towards noninvasive diabetes monitoring. Current Science, 94 (2). pp. 237-242. ISSN 0011-3891

Chakravarty, D and Roy, S and Das, Probal Kumar (2005) DC resistivity of alumina and zirconia sintered with TiC. Bulletin of Materials Science, 28 (3). pp. 227-231. ISSN 0250-4707

Chanda, Abhijit and Singha Roy, R and Basu, Debabrata and Mitra, M K (2005) Comparison of wear properties of alumina-alumina articulating surfaces with conventional material couples used for total hip arthroplasty. Transactions of the Indian Ceramic Society, 64 (4). pp. 203-212. ISSN 0371-750X

Chatterjee, Minati and Naskar, Milan Kanti (2006) Synthesis of yttrium-aluminum-garnet hollow microspheres by reverse-emulsion technique. Journal of the American Ceramic Society, 89 (4). 1443-1446 . ISSN 0002-7820

Chatterjee, Minati and Patra, Amitava (2001) Cadmium sulfide aggregates through reverse micelles. Journal of the American Ceramic Society, 84 (7). 1439 -1444 . ISSN 0002-7820

Chatterjee, S and Basu, S and Chattopadhyay, D and Mistry, Kalyan Kumar and Sengupta, Kamalendu (2001) Humidity sensor using porous tape cast alumina substrate. Review of Scientific Instruments, 72 (6). 2792 -2795. ISSN 0034-6748

Chatterjee , S and Maiti, Himadri Sekhar (2001) A novel method of doping PTC thermistor sensor elements during sintering through diffusion by vapour phase. Materials Chemistry and Physics, 67 (1-3). 294 -297. ISSN 0254-0584

Chaudhuri, S P and Sarkar, P (2000) Dielectric behaviour of porcelain in relation to constitution. Ceramics International, 26 (8). pp. 865-875. ISSN 0272-8842

D

IN2004DE2273A, CSIR-CGCRI, India (2011) A process for manufacturing magneto-electric bismuth ferrite. 247636.

Das, Mitun (2015) Laser Processing of Ceramic Reinforced Titanium Matrix Composite Coatings for Load Bearing Implant Applications. PhD thesis, Indian Institute of Technology, Madras.

Das, Mitun and Balla, Vamsi Krishna and Basu, Debabrata and Manna, Indranil and Kumar, T. S. Sampath and Bandyopadhyaya, Amit (2012) Laser processing of in situ synthesized TiB-TiN-reinforced Ti6A14V alloy coatings. Scripta Materialia, 66 (8). pp. 578-581. ISSN 1359-6462

IN2006DE883A, CSIR-CGCRI, India (2013) An improved process of making glass-ceramic coating on metalic substrates made thereby. 257979.

257/DEL/97 (1997) An improved process for the preparation of high purity ultrafine active alumina. 194358.

Das, Sumana and Datta, Someswar and Mukhopadhyay, Anoop Kumar and Pal, K S and Basu, Debabrata (2010) Al-Al(2)O(3) core-shell composite by microwave induced oxidation of aluminium powder. Materials Chemistry and Physics, 122 (2-3). pp. 574-581. ISSN 0254-0584

Das, Sumana and Mukhopadhyay, Anoop Kumar and Datta, Someswar and Dandapat, N and Basu, Debabrata (2010) Effect of dopants on the phase formation in microwave processed Al-Al(2)O(3) composites. Journal of Alloys and Compounds, 500 (2). pp. 231-236. ISSN 0925-8388

Dey, Arjun and Mukhopadhyay, Anoop Kumar and Gangadharan, S and Sinha, Mithilesh Kumar and Basu, Debabrata (2009) Characterization of Microplasma Sprayed Hydroxyapatite Coating. Journal of Thermal Spray Technology, 18 (4). pp. 578-592. ISSN 1059-9630

Dhar, Anirban and Das, Shyamal and Maiti, Himadri Sekhar and Sen, Ranjan (2010) Fabrication of high aluminium containing rare-earth doped fiber without core-clad interface defects. OPTICS COMMUNICATIONS, 283 (11). pp. 2344-2349. ISSN 0030-4018

G

286/DEL/90,CSIR-CGCRI (1990) A process for coating the surfaces mild steel & stainlesss teel by crystallisable coating composition. 175158.

IN2004DE1758A, CSIR-CGCRI,India (2015) Process for production of wall and floor tiles from single ceramic component. 264562.

H

Halder, N and Chattopadhyay, D and Das Sharma, A and Saha, D and Sen, Amarnath and Maiti, Himadri Sekhar (2001) Effect of sintering atmosphere on the dielectric properties of barium titanate based capacitors. Materials Research Bulletin, 36 (5-6). 905 -913. ISSN 0025-5408

K

Karmakar, B and De, G and Ganguli, D (2000) Dense silica microspheres from organic and inorganic acid hydrolysis of TEOS. Journal of Non-Crystalline Solids, 272 (2-3). 119-126 . ISSN 0022-3093

M

IN2005DE473A, CSIR-CGCRI,India (2011) A composition for making procelain ceramics and a process of making porcelain therefrom. 249263.

Mandal, S and Chakrabarti, S and Ghatak, S and Das, S K (2006) Low expansive glass-ceramic material produced from blast furnace slag and china clay. Industrial Ceramics, 26 (1). pp. 53-59. ISSN 1121-7588

Mandal, S and Seal, A and Dalui, S K and Dey, A K and Ghatak, S and Mukhopadhyay, A K (2001) Mechanical characteristics of microwave sintered silicon carbide. Bulletin of Materials Science, 24 (2). pp. 121-124. ISSN 0250-4707

Mukherji, S K and Machhoya, B B and Savsani, R M and Dan, Tapan Kumar (1993) 'Crawling' - a serious defect in matured glaze. Industrial Ceramics , 13 (2). pp. 74-79. ISSN 1121-7588

Mukhopadhyay, A K (2001) Indentation fatigue in silicon nitride, alumina and silicon carbide ceramics. Bulletin of Materials Science, 24 (2). 105 -109 . ISSN 0250-4707

Mukhopadhyay, A K and Chaudhuri, M R and Seal, A and Dalui, S K and Banerjee, M and Phani, K K (2001) Mechanical characterization of microwave sintered zinc oxide. Bulletin of Materials Science, 24 (2). pp. 125-128. ISSN 0250-4707

Mukhopadhyay, Madhumita and Mukhopadhyay, Jayanta and Das Sharma, Abhijit and Basu, Rajendra Nath (2009) Ball mill assisted synthesis of Ni-YSZ cermet anode by electroless technique and their characterization. Materials science and Engineering B-Advanced Functional Solid-StateMaterials, 163 (2). pp. 120-127. ISSN 0921-5107

N

Nandi, Samit Kumar and Kundu, Biswanath and Mukherjee, Prasenjit and Mandal, Tapan Kumar and Datta, Someswar and De, Dipak Kumar and Basu, Debabrata (2009) In vitro and in vivo release of cefuroxime axetil from bioactive glass as an implantable delivery system in experimental osteomyelitis. Ceramics International, 35 (8). pp. 3207-3216. ISSN 0272-8842

P

Phani, K. K. and Sanyal, Dipayan (2008) The relations between the shear modulus, the bulk modulus and Young's modulus for porous isotropic ceramic materials. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 490 (1-2). pp. 305-312. ISSN 0921-5093

Pratihar, S K and Basu, Rajendra Nath and Maiti, Himadri Sekhar (1997) Preparation and characterisation of porous Ni-YSZ cermet anode for solid oxide fuel cell application. Transactions of the Indian Ceramic Society, 56 (3). pp. 85-87. ISSN 0371-750X

Pratihar, S K and Dassharma, A and Maiti, Himadri Sekhar (2007) Properties of Ni/YSZ porous cermets prepared by electroless coating technique for SOFC anode application. Journal of Materials Science, 42 (17). pp. 7220-7226. ISSN 0022-2461

Pratihar, Swadesh Kumar and Das Sharma, Abhijit and Maiti, Himadri Sekhar (2006) Electrical behavior of nickel coated YSZ cermet prepared by electroless coating technique. Materials Chemistry and Physics, 96 (2-3). pp. 388-395. ISSN 0254-0584

R

Ray, D and Sarkar, Bijit Kumar and Rana, A K and Bose, Nripati Ranjan (2001) The mechanical properties of vinylester resin matrix composites reinforced with alkali-treated jute fibres. Composites Part A-Applied Science and Manufacturing , 32 (1). 119 -127 . ISSN 1359-835X

Roy, Sujit Kumar and Ghosh, Samir Kumar (2004) Reaction processing of interpenetrating phase Al2O3/Al composite: synthesis, microstructure and mechanical properties. Transactions of the Indian Ceramic Society, 63 (4). pp. 219-225. ISSN 0371-750X

Roy, Swagata and Kar, Subrata and Bagchi, Biswajoy and Das, S (2015) Development of transition metal oxide-kaolin composite pigments for potential application in paint systems. Applied Clay Science, 107. pp. 205-212. ISSN 0169-1317

S

1714/DEL/97, CSIR-CGCRI (1997) An improved process for the sintering of lead magnesium niobate (pmn) based ferroelectric materials useful for the fabrication of electronic devices. 194701.

Saha, M and Banerjee, A and Halder, A K and Mondal, J and Sen, Amarnath and Maiti, Himadri Sekhar (2001) Effect of alumina addition on methane sensitivity of tin dioxide thick films. Sensors and Actuators B: Chemical, 79 (2-3). pp. 192-195. ISSN 0925-4005

Samanta, A K and Dhargupta, K K and Ghatak, S (2001) Decomposition reactions in the SiC-Al-Y-O system during gas pressure sintering. Ceramics International, 27 (2). 123 -133 . ISSN 0272-8842

Samanta, A K and Dhargupta, K K and Ghatak, S (2000) SiC-YAG sintered composites from hydroxy hydrogel powder precursors. Ceramics International, 26 (8). 831 -838. ISSN 0272-8842

Samanta, A K and Dhargupta, K K and Ghatak, Sankar (2001) Near net shape SiC-mullite composites from a powder precursor prepared through an intermediate Al-hydroxyhydrogel. Ceramics International, 27 (2). 195 -199. ISSN 0272-8842

Saxena, M and Prasad, B K and Dan, Tapan Kumar (1992) Evaluation of some engineering properties of an enamel-coated steel. Plating and Surface Finishing, 79 (4). pp. 57-61. ISSN 0360-3164

Seal, A and Dalui, A K and Banerjee, M and Mukhopadhyay, A K and Phani, K K (2001) Mechanical properties of very thin cover slip glass disk. Bulletin of Materials Science, 24 (2). 151 -155. ISSN 0250-4707

Sen , Suchitra and Mahanty, Sourindra and Roy, Sudakshina and Heintz, O and Bourgeois, S and Chaumont, D (2005) Investigation on sol-gel synthesized Ag-doped TiO2 cermet thin films. Thin Solid Films, 474 (1-2). pp. 245-249. ISSN 0040-6090

Sinha, Mithlesh Kumar and Sen, P S and Basu, Debabrata (2001) Synthesis, sintering and microstructure of beta-tricalcium phosphate for prosthetic applications. Journal of Indian Chemical Society, 78 (8). 386 -388. ISSN 0019-4522

W

Wani, M F and Mukerji, Joydeb and Prakash, B and Bandyopadhyay, S (1993) Friction and wear behavior of hot-pressed SiAlON-steel ball tribopair under reciprocating sliding conditions. American Ceramic Society Bulletin, 72 (9). pp. 82-87. ISSN 0002-7812

This list was generated on Wed Dec 13 20:16:17 2017 IST.