A

Anand, Akrity and Das, Mitun and Kundu, Biswanath and Balla, Vamsi Krishna and Bodhak, Subhadip and Gangadharan, S (2021) Tribocorrosion characteristics of Ti6Al4V-TiB-TiN in-situ composite coatings prepared using plasma spraying. Journal of Composite Materials, 55 (14). pp. 1935-1946. ISSN 0021-9983

B

Basu, Arindam and Ray, Sayantan and Saha, Suman and Chakraborty, Jui (2021) Development and Validation of RP-HPLC Method for Estimation of Methotrexate Drug Intercalated in Mg-Al Layered Double Hydroxide Nanoparticles. Transactions of the Indian Ceramic Society, 80 (2). pp. 127-134. ISSN 0371-750X

D

Das, Mitun and Sharabani-Yosef, Orna and Eliaz, Noam and Mandler, Daniel (2021) Hydrogel-integrated 3D-printed poly(lactic acid) scaffolds for bone tissue engineering. Journal of Materials Research, 36 (19, SI). pp. 3833-3842. ISSN 0884-2914

M

Mahato, Arnab and De, Munmun and Bhattacharjee, Promita and Kumar, Vinod and Mukherjee, Prasenjit and Singh, Gajendra and Kundu, Biswanath and Balla, Vamsi K and Nandi, Samit Kumar (2021) Role of calcium phosphate and bioactive glass coating on in vivo bone healing of new Mg-Zn-Ca implant. Journal of Materials Science-Materials in Medicine, 32 (5). Art No-55. ISSN 0957-4530

Mallikarjuna, B and Bontha, Srikanth and Krishna, Prasad and Balla, V K (2021) Characterization and thermal analysis of laser metal deposited gamma-TiAl thin walls. Journal of Materials Research and Technology-JMR&T, 15. pp. 6231-6243. ISSN 2238-7854

N

Nayak, Chinmayee and Ariharan, S and Kundu, Biswanath and Singh, Sneha and Sivakumar, Sri and Balla, Vamsi Krishna and Balani, Kantesh (2021) Radiation-induced effects on micro-scratch of ultra high molecular weight polyethylene biocomposites. : Journal of Materials Research and Technology-JMR&T, 11. pp. 2277-2293. ISSN 2238-7854

R

Rajan, S Thanka and Das, Mitun and Kumar, P Sasi and Arockiarajan, A and Subramanian, B (2021) Biological performance of metal metalloid (TiCuZrPd:B) TFMG fabricated by pulsed laser deposition. Colloids and Surfaces B-Biointerfaces, 202. Art No-111684. ISSN 0927-7765

Rokkala, Uzwalkiran and Bontha, Srikanth and Ramesh, M R and Balla, Vamsi Krishna and Srinivasan, A K and Kailas, Satish (2021) Tailoring surface characteristics of bioabsorbable Mg-Zn-Dy alloy using friction stir processing for improved wettability and degradation behavior. Journal of Materials Research and Technology-JMR&T, 12. pp. 1530-1542. ISSN 2238-7854

Rokkala, Uzwalkiran and Jana, Anuradha and Bontha, Srikanth and Ramesh, M R and Balla, Vamsi Krishna (2021) Comparative investigation of coating and friction stir processing on Mg-Zn-Dy alloy for improving antibacterial, bioactive and corrosion behaviour. Surface & Coatings Technology , 425. Art No-127708. ISSN 0257-8972

Roy, Payal and saha, Suman and Chakraborty, Jui (2021) Looking into the possibilities of cure of the type 2 diabetes mellitus by nanoparticle-based RNAi and CRISPR-Cas9 system: A review. Journal of Drug Delivery Science and Technology, 66. Art No-102830. ISSN 1773-2247

Roy, Subhasis and Mukherjee, Prasenjit and Das, Pradip Kumar and Ghosh, Prabal Ranjan and Datta, Pradyot and Kundu, Biswanath and Nandi, Samit Kumar (2021) Local delivery systems of morphogens/biomolecules in orthopedic surgical challenges. Materials Today Communications, 27. Art No-102424. ISSN 2352-4928

S

Sahoo, Souvik and Joshi, Anuja and Balla, Vamsi K and Das, Mitun and Roy, Shibayan (2021) Site-specific microstructure, porosity and mechanical properties of LENSTM processed Ti-6Al-4V alloy. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 820. Art No-141494. ISSN 0921-5093

Singh, Paramjot and Balla, Vamsi K and Atre, Sundar and German, Randall M and Kate, Kunal H (2021) Factors affecting properties of Ti-6Al-4V alloy additive manufactured by metal fused filament fabrication. Powder Technology, 386. pp. 9-19. ISSN 0032-5910

Svetlizky, David and Das, Mitun and Zheng, Baolong and Vyatskikh, Alexandra L and Bose, Susmita and Bandyopadhyay, Amit and Schoenung, Julie M and Lavernia, Enrique J and Eliaz, Noam (2021) Directed energy deposition (DED) additive manufacturing: Physical characteristics, defects, challenges and applications. Materials Today, 49. pp. 271-295. ISSN 1369-7021