Article

Pal, Mousumi and Das, Swapan Kumar (2018) Phase and microstructural evolution in quartz-free porcelain tile compositions. Journal of the Australian Ceramic Society, 54 (1). pp. 109-117. ISSN 0004-881X

Pal, Mousumi and Das, Sukhen and Gupta, Surajit and Das, Swapan Kumar (2016) Thermal analysis and vitrification behavior of slag containing porcelain stoneware body. Journal of Thermal Analysis and Calorimetry, 124 (3). pp. 1169-1177. ISSN 1388-6150

Pal, Mousumi and Das, Sukhen and Das, Swapan Kumar (2015) Anorthite porcelain: synthesis, phase and microstructural evolution. Bulletin of Materials Science, 38 (2). pp. 551-555. ISSN 0250-4707

Maldhure, Atul V and Tripathi, Himansu Shekhar and Ghosh, A and Das, Swapan Kumar (2014) Mullite-Corundum Composites from Bauxite: Effect of Chemical Composition. Transactions of the Indian Ceramic Society, 73 (1). pp. 31-36. ISSN 0371-750X

Jana, Manidip and Bhattacharya, Debasis and Bahinipati, Rajesh and Das, Swapan Kumar (2014) Thermo-Mechanical Behaviour of LCC in Presence of Glassy Phase Containing Sintered Alumina Aggregate. Journal of the Australian Ceramic Society, 50 (2). pp. 1-8. ISSN 0004-881X

Oluseyi, Anjanaku Koluseyi and Pal, Mousumi and Das, Swapan Kumar (2013) Utilization of Cr-doped soda-lime scrap glass in porcelain body. Indoceram of AIPMA, 2 (1). pp. 1-5. ISSN 2321-1970

Ghose, Subhojeet and Saigal, Chirag and Maldhure, Atul and Das, Swapan Kumar (2013) Effect of reactive alumina on the physico-mechanical properties of refractory castable. Transactions of the Indian Ceramic Society, 72 (2). pp. 113-118. ISSN 0371-750X

Das, Swapan Kumar and Pal, M and Ghosh, Jiten and Pathi, K V and Mondal, S (2013) The effect of basic oxygen furnace slag and fly ash additions in triaxial porcelain composition: phase and micro structural evolution. Transactions of The Indian Institute of Metals, 66 (3). pp. 213-220. ISSN 0972-2815

Pal, Mousumi and Das, Swapan Kumar (2013) High Strength Porous Ceramic Tile from Inorganic Wastes and Other Ceramic Minerals. Interceram: International Ceramic Review, 62 (1). pp. 20-24. ISSN 0020-5214

Haldar, Manas Kamal and Das, Swapan Kumar (2012) Effect of substitution of sand stone dust for quartz and clay in triaxial porcelain composition. Bulletin of Materials Science, 35 (5). pp. 897-904. ISSN 0250-4707

Das, Swapan Kumar and Ghosh, Jiten and Mandal, Ashok Kumar and Singh, Nar and Gupta, Surajit (2012) Iron ore tailing: a waste material used in ceramic tile compositions as alternative source of raw materials. Transactions of the Indian Ceramic Society, 71 (1). pp. 21-24. ISSN 0371-750X

Ghosh, Jiten and Mandal, Ashok Kumar and Singh, N and Das, Swapan Kumar (2011) Evaluation of iron ore tailings for the production of building materials. Industrial Ceramics , 31 (2, SI). pp. 115-119. ISSN 1121-7588

Roy, Anandita and Singh, Samarendra K and Banerjee, P C and Dana, Kausik and Das, Swapan Kumar (2010) Bio-beneficiation of kaolin and feldspar and its effect on fired characteristics of triaxial porcelain. Bulletin of Materials Science, 33 (3). pp. 333-338. ISSN 0250-4707

Sarkar, Ritwik and Singh, Nar and Das, Swapan Kumar (2010) Utilization of steel melting electric arc furnace slag for development of vitreous ceramic tiles. Bulletin of Materials Science, 33 (3). pp. 293-298. ISSN 0250-4707

Ghosh, Arup and Tripathi, Himansu Shekhar and Das, Swapan Kumar (2009) Research on refractory raw materials at CGCRI - a review. Iron & Steel Review Journal, 53 (3). 18,20,22,24,26. ISSN 0578-7661

Deb, S and Mukhopadhyay, Tapas Kumar and Das, Swapan Kumar (2008) Development of low cost high strength stoneware compositions utilising illite variety of clay, fly ash and rice husk ash. Indoceram: Indian Ceramic Review, 45 (2). pp. 29-33.

Sarkar, Ritwik and Singh, Nar and Das, Swapan Kumar (2007) Effect of addition of pond ash and fly ash on properties of ash-clay burnt bricks. Waste Management & Research, 25 (6). pp. 566-571. ISSN 0734-242X

Bhattacharyya, Sunipa and Das, Swapan Kumar and Dana, Kausik and Mitra, Nirendra Krishna (2007) Titania doped triaxial porcelain: Enhancement of strength by controlled heat treatment. BULLETIN OF MATERIALS SCIENCE, 30 (3). pp. 231-234. ISSN 0250-4707

Sarkar, Ritwik and Das, M and Das, Swapan Kumar (2007) Porous ceramic from wastes. Indoceram: Indian Ceramic Review , 44 (3). pp. 72-75.

Sarkar, Ritwik and Ghosh, S and Das, Swapan Kumar (2007) Waste silica from aluminium fluoride industries used for ceramic whitewares. American Ceramic Society Bulletin, 86 (10). pp. 9201-9207. ISSN 0002-7812

Dana, Kausik and Ghosh, Syamal and Mukhopadhyay, Tapas Kumar and Das, Swapan Kumar (2006) Feldspathic and pyrophyllitic porcelain evolution during fast firing. American Ceramic Society Bulletin, 85 (12). 9201-9205 . ISSN 0002-7812

Roy, I and Ghosh, S and Dana, Kausik and Das, Swapan Kumar (2006) Development of high strength stoneware compositions utilizing ferrugineous and inferior grade china clays. Indoceram: Indian Ceramic Review, 43 (3). pp. 80-83.

Sarkar, Ritwik and Das, Swapan Kumar (2006) Hydro-thermal treatment of CaO-SiO2-Al2O3-H2O system. American Ceramic Society Bulletin, 85 (3). pp. 9201-9213. ISSN 0002-7812

Ghosh, Shyamal and Mukhopadhyay, Tapas Kumar and Chakrabarti, S and Das, Swapan Kumar (2006) Influence of kaolinitic clay on the physico-mechanical properties of common clay-fly ash mix for building bricks. Transactions of the Indian Ceramic Society, 65 (4). pp. 197-201. ISSN 0371-750X

Sarkar, Ritwik and Das, Swapan Kumar and Mandal, Pradip Kumar and Maiti, Himadri Sekhar (2006) Phase and microstructure evolution during hydrothermal solidification of clay-quartz mixture with marble dust source of reactive lime. Journal of the European Ceramic Society, 26 (3). 297 -304. ISSN 0955-2219

Bhattacharyya, Sunipa and Das, Swapan Kumar and Mitra, Nirendra Krishna (2005) Effect of titania on fired characteristics of triaxial porcelain. Bulletin of Materials Science, 28 (5). pp. 445-452. ISSN 0250-4707

Mandal, S and Chakrabarti, S and Ghatak, Shankar and Das, Swapan Kumar (2005) Ultra low and negative expansion glass-ceramic materials produced from pyrophyllite and blast furnace slag. Bulletin of Materials Science, 28 (5). pp. 437-443. ISSN 0250-4707

Das, Swapan Kumar and Singh, N and Maiti, Himadri Sekhar (2005) Refractory-type porcelain compositions. American Ceramic Society Bulletin, 84 (5).

Das, Swapan Kumar and Dana, Kausik and Singh, Nar and Sarkar, Ritwik (2005) Shrinkage and strength behaviour of quartzitic and kaolinitic clays in wall tile compositions. Applied Clay Science, 29 (2). pp. 137-143. ISSN 0169-1317

Mukhopadhyay, Tapas Kumar and Prasad, C S and Das, Swapan Kumar (2005) Development of craze resistance glaze for terracotta wares. Indoceram: Indian Ceramic Review, 42 (2). pp. 1-4.

Bhar, K and Ghosh, Shyamal Kumar and Dana, Kausik and Das, Swapan Kumar (2005) Effect of additives on fired characteristics of ferruginous clays of West Bengal. Indoceram: Indian Ceramic Review, 42 (4). pp. 60-63.

Das, Swapan Kumar and Mukhopadhyay, Tapas Kumar and Maiti, Himadri Sekhar (2005) Pottery and glass: a versatile media for creative art work. Vision- A Journal of Visual Art. pp. 109-112.

Dana, Kausik and Dey, J and Das, Swapan Kumar (2005) Synergistic effect of fly ash and blast furnace slag on the mechanical strength of traditional porcelain tiles. Ceramics International, 31 (1). pp. 147-152. ISSN 0272-8842

Das, Swapan Kumar and Mukhopadhyay, Tapas Kumar (2005) Traditional ceramics and allied clay products: Scientific and social relevance. Science and Culture, 71 (5-6). pp. 138-143. ISSN 0036-8156

Dana, Kausik and Das, Swapan Kumar (2004) Effect of Na-feldspar and K-feldspar on the whiteness and other properties of porcelain bodies. Industrial ceramics, 24 (2). pp. 91-95. ISSN 1121-7588

Bhattacharya, T K and Ghosh, Arup and Tripathi, Himansu Shekhar and Das, Swapan Kumar (2003) Solid state sintering of lime in presence of La2O3 and CeO2. Bulletin of Materials Science, 26 (7). pp. 703-706. ISSN 0250-4707

Das, Swapan Kumar and Dana, Kausik (2003) Differences in densification behaviour of K- and Na-feldspar-containing porcelain bodies. Thermochemica Acta, 406 (1-2). pp. 199-206. ISSN 0040-6031

Das, Swapan Kumar and Mandal, Pradip Kumar and Sarkar, Ritwik (2003) Effect of synthetic aggregate on alumina castables. American Ceramic Society Bulletin, 82 (10). pp. 9101-9106. ISSN 0002-7812

Dana, Kausik and Das, Swapan Kumar (2003) Formulation of some frit compositions for rapid once-fixed wall tile glaze. Transactions of the Indian Ceramic Society, 62 (3). pp. 158-161. ISSN 0371-750X

Dana, Kausik and Das, Swapan Kumar (2003) High strength ceramic floor tile compositions containing Indian metallurgical slags. Journal of Materials Science Letters, 22 (5). pp. 387-389. ISSN 0261-8028

Daspoddar, Dipanjan and Das, Swapan Kumar and Daspoddar, Pranab Kumar (2003) Effect of silica sol of different routes on the properties of low cement castables. Bulletin of Materials Science, 26 (2). pp. 227-231. ISSN 0250-4707

Das, Swapan Kumar and Sarkar, Ritwik and Mandal, Pradip Kumar and Mukherjee, S (2003) No-cement high-alumina self-flow castable. American Ceramic Society Bulletin, 82 (2). pp. 55-59. ISSN 0002-7812

Sarkar, Ritwik and Das, Swapan Kumar and Mandal, Pradip Kumar and Mukherjee, Somnath and Dasgupta, Saktimay and Das, Samir Kumar (2003) Fibre reinforced no cement self flow high alumina castable: a study. Transactions of the Indian Ceramic Society, 63 (2) 75-98 (2004), 62 (1). pp. 34-37. ISSN 0371-750X

Kumar, S and Das, Swapan Kumar and Daspoddar, Pranab Kumar (2003) Thermo-mechanical behaviour of low cement castables derived from mullite aggregates synthesised from beach sand sillimanite. Ceramics International, 29 (2). pp. 139-144. ISSN 0272-8842

Dasgupta, Subrata and Das, Swapan Kumar (2002) Paper pulp waste - A new source of raw material for the synthesis of a porous ceramic composite. Bulletin of Materials Science, 25 (5). pp. 381-385. ISSN 0250-4707

Dana, Kausik and Das, Swapan Kumar (2002) Some studies on ceramic body compositions for wall and floor tiles. Transactions of the Indian Ceramic Society, 61 (2). pp. 83-86. ISSN 0371-750X

Tripathi, Himansu Shekhar and Das, Swapan Kumar and Banerjee, Goutam (2000) Thermal shock behaviour of high alumina aggregates derived from sillimanite beach sand with and without Fe2O3 doping. Ceramics International, 26 (1). pp. 1-6. ISSN 0272-8842

Kumar, S and Das, Swapan Kumar and Daspoddar, P K (1999) Effect of fly ash based refractory aggregates on the high temperature properties of calcium aluminates. IRMA Journal, 32 (1). pp. 6-13. ISSN 0250-5304

Kumar, Sanjay and Das, Swapan Kumar and Daspoddar, P K (1999) Microstructure of calcium aluminates and their mixes after 3 days of hydration. Transactions of the Indian Ceramic Society, 58 (5). pp. 115-117. ISSN 0371-750X

Adhikari, Uday Bhanu and Das, Swapan Kumar and Banerjee, Goutam (1998) Characterization of magnesium hydroxy phosphate binder prepared by a coprecipitation technique for refractory application. Industrial Ceramics , 18 (1). pp. 12-15. ISSN 1121-7588