Dandapat, Nandadulal and Ghosh, Sumana (2020) Interfacial and Cross-sectional Studies of Thermally Cycled Alumina-Monel Brazed Joint. Transactions of the Indian Ceramic Society, 79 (3). pp. 152-157. ISSN 0371-750X

PDF - Published Version Restricted to Registered users only Download (2061Kb) | Request a copy

Abstract

Alumina and monel superalloy was successfully joined by active metal brazing technique using Ticusil (68.8Ag-26.7Cu-4.5Ti in wt%) filler alloy in a vacuum furnace at 910oC for 10 min under a vacuum of 5x10(-6)Torr. Phase analysis of the monel-filler alloy and alumina-filler alloy interfaces was conducted by X-ray diffraction analysis. Interfacial and cross-sectional microstructural investigation and determination of elemental composition were performed by scanning electron microscopy and energy dispersive X-ray analysis. No crack was found at the joint interfaces after thermal cycling test for 100 cycles between 50 degrees and 600 degrees C. Microhardness was estimated by Vickers hardness tester at the cross-section of the joint after thermal cycling test. Typical brazing strength of the thermally cycled joint was above 23 MPa. Helium leak tests indicated good hermiticity of the thermally cycled brazed joints.

Item Type:	Article
Subjects:	Engineering Materials
Divisions:	Bioceramics & Coating
Depositing User:	Bidhan Chaudhuri
Date Deposited:	02 Feb 2021 11:47
Last Modified:	02 Feb 2021 11:47
URI:	http://cgcri.csircentral.net/id/eprint/4875

Actions (login required)

View Item