Article

Phani, Kalyan Kumar and Sanyal, Dipayan (2009) Elastic properties of porous polycrystalline thoria-A relook. Journal of the European Ceramic Society, 29 (3). pp. 385-390. ISSN 0955-2219

Phani, Kalyan Kumar (2008) Correlation between ultrasonic shear wave velocity and Poisson's ratio for isotropic porous materials. Journal of Materials Science, 43 (1). pp. 316-323. ISSN 0022-2461

Phani, Kalyan Kumar (2008) A novel method of predicting ultrasonic and elastic properties of isotropic ceramic materials after sintering from the properties of partially sintered or green compacts. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 91 (1). pp. 215-222. ISSN 0002-7820

Phani, Kalyan Kumar and Sanyal, Dipayan (2005) Critical reevaluation of the prediction of effective Poisson's ratio for porous materials. Journal of Materials Science, 40 (21). pp. 5685-5690. ISSN 0022-2461

Seal, Anshuman and Dalui, Srikanta and Mukhopadhyay, Anoop Kumar and Phani, Kalyan Kumar and Maiti, Himadri Sekhar (2003) Mechanical behavior of glass polymer multilayer composites. Journl of Materials Science, 38 (5). pp. 1063-1071. ISSN 0022-2461

Seal, A and Dalui, Srikanta and Mukhopadhyay, Anup Kumar and Phani , Kalyan Kumar and Maiti, Himadri Sekhar (2003) Novel glass polymer multilayer composites with high toughness. Transactions of the Indian Ceramic Society, 62 (1). pp. 22-26. ISSN 0371-750X

Seal, A and Bose, Nripati Ranjan and Dalui, S K and Mukhopadhyay, Anoop Kumar and Phani, Kalyan Kumar and Maiti, Himadri Sekhar (2001) Mechanical properties of glass polymer multilayer composite. Bulletin of Materials Science, 24 (2). 197 -201. ISSN 0250-4707

Mukhopadhyay, Anoop Kumar and Phani, Kalyan Kumar (1999) Ultrasonic velocity-porosity relations: An analysis based on a minimum contact area model. Journal of Materials Science Letters, 18 (21). pp. 1759-1760. ISSN 0261-8028

Mukhopadhyay, Anoop Kumar and Phani, Kalyan Kumar (1998) Young's modulus-porosity relations: an analysis based on a minimum contact area model. Journal of Materials Science, 33 (1). pp. 69-72. ISSN 0022-2461

Mukherjee, S and Dey, A K and Phani, Kalyan Kumar (1997) Comparative study of measured attenuation with the Rayleigh region scattering theory. Journal of Materials Science, 32 (3). pp. 737-740. ISSN 0022-2461

Phani, Kalyan Kumar and Mukherjee, Sampad and Basu, Debabrata (1996) Ultrasonic characterization of zirconia-toughened alumina ceramics. Journal of the American Ceramic Society, 79 (12). pp. 3331-3335. ISSN 0002-7820

Dalui, S K and Roychowdhury, M and Phani, Kalyan Kumar (1996) Ultrasonic evaluation of gypsum plaster. Journal of Materials Science, 31 (5). pp. 1261-1263. ISSN 0022-2461

Basu, Debabrata and Mukherjee, S and Phani, Kalyan Kumar (1996) Non-destructive characterization of zirconia-toughened alumina ceramics using ultrasonics. Journal of Materials Science, 31 (4). pp. 1021-1026. ISSN 0022-2461

Phani, Kalyan Kumar (1996) Porosity-dependence of elastic properties and ultrasonic velocity in polycrystalline alumina - A model based on cylindrical pores. Journal of Materials Science, 31 (1). pp. 262-266. ISSN 0022-2461

Phani, Kalyan Kumar (1996) Porosity-dependence of ultrasonic velocity in sintered materials - A model based on the self-consistent spheroidal inclusion theory. Journal of Materials Science, 31 (1). pp. 272-279. ISSN 0022-2461

Choudhury, K and Phani, Kalyan Kumar (1994) Thermal shock damage and thermal fatigue of glass- an acoustoultrasonic study. Materials Evaluation, 52 (12). pp. 1389-1393. ISSN 0025-5327

Maitra, A K and Phani, Kalyan Kumar (1994) Ultrasonic evaluation of elastic parameters of sintered powder compacts. Journal of Materials Science, 29 (17). pp. 4415-4419. ISSN 0022-2461

Choudhury, K and Dey, A K and Phani, Kalyan Kumar (1994) Ultrasonic-detection of changes in the microstructure of glass-ceramics during crystallization. Journal of Materials Science Letters, 13 (5). pp. 310-312. ISSN 0261-8028

Das, A C and Mukherjee, S and Chaudhury, K and Niyogi, S K and Phani, Kalyan Kumar (1993) Crack growth in castable refractory due to thermal shock fatigue: an acoustoo-ultrasonic study. Transactions of the Indian Ceramic Society, 52 (4). pp. 139-145. ISSN 0371-750X

Mukherjee, D and Sengupta, P K and Bose, Nripati Ranjan and Phani, Kalyan Kumar (1990) Tensile failure of unidirectional carbon-fiber reinforced polypropylene composite - an acoustic ultrasonic study. Journal of Materials Science, 25 (2A). pp. 1104-1107. ISSN 0022-2461

De, Ashok Kumar and Phani, Kalyan Kumar (1990) Gauge length effect on the strength of silicon-carbide and sapphire filaments. Journal of Composite Materials, 24 (2). pp. 220-232. ISSN 0021-9983

Phani, Kalyan Kumar (1989) A modified Weibull distribution for the strength and life prediction for hot-pressed silicon-nitride at elevated-temperatures. Ceramics International, 15 (2). pp. 113-119. ISSN 0272-8842

Phani, Kalyan Kumar and De, Ashok Kumar (1988) Evaluation of concurrent flaw populations in silicon-carbide in terms of a modified Weibull distribution function. Journal of the American Ceramic Society, 71 (4). C196-C197. ISSN 0002-7820

Phani, Kalyan Kumar (1988) Strength distribution and gauge length extrapolations in glass-fiber. Journal of Materials Science, 23 (4). pp. 1189-1194. ISSN 0022-2461

Phani, Kalyan Kumar (1988) Evaluation of single-fibre strength distribution from fiber bundle strength. Journal of Materials Science, 23 (3). pp. 941-945. ISSN 0022-2461

Phani, Kalyan Kumar and Maitra, A K and De, Ashok Kumar (1988) A new distribution function for analysis of dynamic fatigue of neutral glass. Indian Journal of Technology, 26 (2). pp. 95-98. ISSN 0019-5669

Phani, Kalyan Kumar (1988) Analysis of static and dynamic fatigue of polycrstalline alumina. Journal of Materials Science, 23 (11). pp. 3864-3868. ISSN 0022-2461

Phani, Kalyan Kumar and Niyogi, S K and De, Ashok Kumar (1988) Porosity dependence of fracture mechanical properties of reaction sintered Si3N4. Journal of Materials Science Letters, 7 (11). pp. 1253-1256. ISSN 0261-8028

Phani, Kalyan Kumar and De, Ashok Kumar (1988) An analysis of short length-strength distribution and prediction of long-length strength of optical fibres. Transactions of the Indian Ceramic Society, 47 (4). pp. 103-109. ISSN 0371-750X

Phani, Kalyan Kumar (1988) A new modified Weibull distribution function for the evaluation of the strength of silicon-carbide and alumina fibers. Journal of Materials Science, 23 (7). pp. 2424-2428. ISSN 0022-2461

Phani, Kalyan Kumar (1987) Analysis of fatigue failure of optical-glass fibers. Journal of Materials Science Letters, 6 (12). pp. 1389-1391. ISSN 0261-8028

Phani, Kalyan Kumar and Niyogi, S K (1987) Elastic modulus-porosity relation in polycrystalline rare-earth-oxides. Journal of the American Ceramic Society, 70 (12). C362-C366. ISSN 0002-7820

Phani, Kalyan Kumar and De, Ashok Kumar (1987) A flaw distribution function for failure analysis of brittle materials. Journal of Applied Physics, 62 (11). pp. 4433-4437. ISSN 0021-8979

Phani, Kalyan Kumar and Mukerje, R N (1987) Elastic properties of porous thermosetting polymers. Journal of Materials Science, 22 (10). pp. 3453-3458. ISSN 0022-2461

Phani, Kalyan Kumar (1987) Tensile-strength of SiC whiskers. Journal of Materials Science Letters, 6 (10). pp. 1176-1178. ISSN 0261-8028

Phani, Kalyan Kumar and Maitra, A K (1987) A cumulative flaw distribution function for predicting failure of glass. Materials Science and Engineering, 93. L5-L9. ISSN 1673-2812

Phani, Kalyan Kumar (1987) A new modified Weibull distribution function. Journal of the American Ceramic Society, 70 (8). C182-C184. ISSN 0002-7820

Phani, Kalyan Kumar and Bose, Nripati Ranjan (1987) Hydrothermal aging of jute glass-fiber hybrid composites - an acoustoultrasonic study. Journal of Materials Science, 22 (6). pp. 1929-1933. ISSN 0022-2461

Phani, Kalyan Kumar and Niyogi, S K (1987) Elastic-modulus porosity relationship for Si3N4. Journal of Materials Science Letters, 6 (5). pp. 511-515. ISSN 0261-8028

Dey, A and Phani, Kalyan Kumar and Kumar, Sachchidananda (1987) Acoustoultrasonic study on glass-ceramics in the system MgO-Al2O3-SiO2. Journal of Materials Science Letters, 6 (1). pp. 17-19. ISSN 0261-8028

Phani, Kalyan Kumar and Niyogi, S K (1987) Young modulus of porous brittle solids. Journal of Materials Science, 22 (1). pp. 257-263. ISSN 0022-2461

Das Roy, P K and Phani, Kalyan Kumar (1987) Elastic properties of mica-filled polyester resin composites. Transactions of the Indian Ceramic Society, 46 (2). 51-52,50. ISSN 0371-750X

Phani, Kalyan Kumar (1987) Evaluation of strength distribution of SiC-CVD filaments. CGCRI Bulletin, 34 (2). pp. 33-37. ISSN 0008-9397

Phani, Kalyan Kumar and Niyogi, S K (1987) On porosity dependence of hardness in gypsum systems. CGCRI Bulletin, 34 (2). pp. 49-51. ISSN 0008-9397

Phani, Kalyan Kumar and Bose, Nripati Ranjan (1987) Temperature-dependence of hydrothermal aging of CSM-laminate during water immersion. Composites Science and Technology , 29 (2). pp. 79-87. ISSN 0266-3538

Phani, Kalyan Kumar (1987) The strength length relationship for carbon-fibers. Composites Science and Technology, 30 (1). pp. 59-71. ISSN 0266-3538

Phani, Kalyan Kumar and Niyogi , S K and Maitra, A K and Roychaudhury, M (1986) Strength and elastic-modulus of a porous brittle solid - an acoustoultrasonic study. Journal of Materials Science, 21 (12). 4335-4341 . ISSN 0022-2461

Phani , Kalyan Kumar (1986) Young modulus-porosity relation in gypsum systems. American Ceramic Society Bulletin, 65 (12). 1584 -1586 . ISSN 0002-7812

Phani, Kalyan Kumar and Bose, Nripati Ranjan (1986) Hydrothermal aging of CSM-laminate during water immersion - an acoustoultrasonic study. Journal of Materials Science, 21 (10). pp. 3633-3637. ISSN 0022-2461

Phani, Kalyan Kumar (1986) Elastic-constant-porosity relations for polycrystalline thoria. Journal of Materials Science Letters, 6 (7). pp. 747-750. ISSN 0261-8028

Phani , Kalyan Kumar and Niyogi, S K (1986) Porosity dependence of ultrasonic velocity and elastic-modulus in sintered uranium-dioxide - a discussion. Journal of Materials Science Letters, 5 (4). pp. 427-430. ISSN 0261-8028

Phani, Kalyan Kumar and Maitra, A K (1986) Evaluation of fracture parameters of glass from flexural tests. Transactions of the Indian Ceramic Society, 45 (1). pp. 1-6. ISSN 0371-750X

Phani, Kalyan Kumar and Maitra, A K (1986) Failure probability of borosilicate glass during dynamic loading - a statistical analysis. Transactions of the Indian Ceramic Society, 45 (6). pp. 135-139. ISSN 0371-750X

Conference or Workshop Item

Mukhopadhyay, A K and Basu, Debabrata and Mukherjee, S and Phani, Kalyan Kumar (1996) Ultrasonic velocity measurement for characterisation of porosity in sintered ceramics and metals. In: Trends In NDE Science and Technology - Proceedings of the 14th World Conference On Ndt (14th Wcndt), Vols 1-5 , Dec 08-13, 1996 , New Delhi, India .